Gates® Power Transmission Super HC® 8V1700 Banded Heavy Duty V-Belt, 8V Section, 1 in W Top, 170 in L Outside, 7/8 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053016628
-
Manufacturer Part Number8V1700
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness7/8 in
-
MaterialChloroprene
-
Top Width1 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter15.916 in
-
Section Size8V
-
Series9336
-
Number of Ribs1
-
Outside Length170 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
| Competitor Name | Cross-Reference Number |
|---|---|
| Motion Industries | 00677222 |
-
Alternative Part Number93361700
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Super HC® 8V1700 Banded Heavy Duty V-Belt, 8V Section, 1 in W Top, 170 in L Outside, 7/8 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
22-TOOTH H-PITCH TL TIMING BELT SHEAVE - IDCTL22H3001615>
Square D D321NCP Single Throw Safety Switch, 240 V AC, 30 A, 1.5 hp 240 V at AC 60 Hz, 3 hp 240 V at AC 60 Hz, 3 hp 240 V at AC 60 Hz, 7.5 hp 240 V at AC 60 Hz, 3 poles
Schneider Electric's Square D general duty safety switches are designed for residential and light commercial applications where durability and economy are prime considerations. Typical loads include lighting, air conditioning, and appliances. General duty safety switches feature a quick make, quick break operating mechanism. This single throw safety switch is a fusible disconnect and has a rated current of 30A for 240VAC. This general duty switch has a 4 wire configuration with 3 poles and a factory installed neutral. The device accepts H, K or R fuse types. The enclosure is surface mounted and is a Type 1. This product has consumer packaging. General duty safety switches are UL Listed, and meet or exceed the NEMA Standard KS1.
2-HANDLE NO SPRAYER KITCHEN FAUCET-JWH400660>
Gates® Power Transmission Super HC® Molded Notch PowerBand® 2/5VX560 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 56 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
Gates® Power Transmission Super HC® 5V800 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 80 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
