Gates® Power Transmission Super HC® Molded Notch PowerBand® 8/5VX1600 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 160 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
-
BrandGates® Power Transmission
-
UPC72053350494
-
Manufacturer Part Number8/5VX1600
-
CountryUSA|Canada
-
Temperature Range-60 to 250 deg F
-
Thickness35/64 in
-
MaterialEPDM
-
Top Width5/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Minimum Pulley Diameter7.958 in
-
Section Size5VX
-
Series9389
-
Number of Ribs8
-
Outside Length160 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Patented ethylene material construction provides -60 to 250 deg F temperature range to resist belt cracking
-
Alternative Part Number93898160
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Super HC® Molded Notch PowerBand® 8/5VX1600 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 160 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
Browning® Gripbelt® 1059963 Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 4.12 in OD, 4.07 in Dia Pitch, 11/16 in W Face
2-HANDLE KITCHEN FAUCET WITH SPRAYER-JWH400677>
Channellock® PermaLock® 480-BULK Tongue and Groove Plier, 5-1/2 in Nominal, 3 in L x 0.59 in THK 1080 High Carbon Steel Straight Jaw, Serrated Jaw Surface, 20-1/4 in OAL
The Channellock® BIGAZZ® straight jaw tongue and groove plier is as big as the job you need with a 5-1/2 in jaw capacity. Its 12 non-slip, undercut adjustment channels offer a versatile range of adjustments for virtually every field application. This plier is built to last with a PermaLock® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser heat treated teeth to provide a better, longer lasting grip. Pliers are made in USA and forged from high carbon steel that is specially coated for ultimate rust prevention.
Gates® Power Transmission Super HC® 3V450 Banded Heavy Duty V-Belt, 3V Section, 3/8 in W Top, 45 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
STRAIGHT-ID SELF-ALIGNING BALL BEARING-NTN1215 >
