Gates® Power Transmission Super HC® Molded Notch PowerBand® 5/5VX1800 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 180 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
-
BrandGates® Power Transmission
-
UPC72053236873
-
Manufacturer Part Number5/5VX1800
-
CountryUSA|Canada
-
Temperature Range-60 to 250 deg F
-
Thickness35/64 in
-
MaterialEPDM
-
Top Width5/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Minimum Pulley Diameter7.958 in
-
Section Size5VX
-
Series9389
-
Number of Ribs5
-
Outside Length180 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Patented ethylene material construction provides -60 to 250 deg F temperature range to resist belt cracking
| Competitor Name | Competitor Part Number |
|---|---|
| Motion Industries | 00682369 |
-
Alternative Part Number93895180
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Super HC® Molded Notch PowerBand® 5/5VX1800 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 180 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
3 -MALE PIPE THREADX8 STAINLESS STEEL PIPE NIPPLE
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
Morse® Matrix II ZWEDC1014MAT-7 9-1/2" Welded Band Saw Blade, 7 ft 9-1/2 in L, 1/2 in W x 0.025 in THK, 10/14 TPI, Bi-Metal Blade, HSS Tooth
HCI Preferred Supplier 38952 Type A Non-Reinforced Air Brake Tubing, 100 ft L, 0.04 in THK Wall, Nylon
HCI Preferred Supplier 38952 Type A Non-Reinforced Air Brake Tubing, 100 ft L, 0.04 in THK Wall, Nylon
