Gates® Power Transmission Super HC® Molded Notch PowerBand® 4/5VX1800 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 180 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
-
BrandGates® Power Transmission
-
UPC72053236811
-
Manufacturer Part Number4/5VX1800
-
CountryUSA|Canada
-
Temperature Range-60 to 250 deg F
-
Thickness35/64 in
-
MaterialEPDM
-
Top Width5/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Minimum Pulley Diameter7.958 in
-
Section Size5VX
-
Series9389
-
Number of Ribs4
-
Outside Length180 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Patented ethylene material construction provides -60 to 250 deg F temperature range to resist belt cracking
-
Alternative Part Number93894180
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Super HC® Molded Notch PowerBand® 4/5VX1800 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 180 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
1-1/2" -MALE PIPE THREADX4" GALVANIZED NIPPLE-FIT11/2X4GN >
HCI Preferred Supplier 54051216 Expanding Pipe Adapter, 3/4 x 1 in Nominal, Male Pipe x Female Pipe End Style, Steel
HCI Preferred Supplier 54051216 Expanding Pipe Adapter, 3/4 x 1 in Nominal, Male Pipe x Female Pipe End Style, Steel
Gates® Power Transmission Super HC® 8V1000 Banded Heavy Duty V-Belt, 8V Section, 1 in W Top, 100 in L Outside, 7/8 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Gates® Power Transmission Metric-Power™ XPB1320 Heavy Duty Molded Notch V-Belt, XPB Section, 17 mm W Top, 1332 mm L Outside, 13 mm THK, EPDM
Manufactured to our exacting standards for quality, safety, and dependability. Their proprietary construction ensures unmatched load-carrying capacity paired with superior flex and stretch resistance.
F2B-SXR-200 Dodge® 131077 210 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 2 in Dia Bore, 6.19 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 7.44 in OAL/Dia
F2B-SXR-200 Dodge® 131077 210 Normal Duty Non-Expansion Single Lip Flange Mount Ball Bearing Unit, 2 in Dia Bore, 6.19 in L Bolt Center-to-Center, 2-Bolt Base Flange Mount, 7.44 in OAL/Dia
