Gates® Power Transmission Super HC® Molded Notch PowerBand® 3/5VX500 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 50 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
-
BrandGates® Power Transmission
-
UPC72053262629
-
Manufacturer Part Number3/5VX500
-
CountryUSA|Canada
-
Temperature Range-60 to 250 deg F
-
Thickness35/64 in
-
MaterialEPDM
-
Top Width5/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Minimum Pulley Diameter7.958 in
-
Section Size5VX
-
Series9389
-
Number of Ribs3
-
Outside Length50 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Patented ethylene material construction provides -60 to 250 deg F temperature range to resist belt cracking
-
Alternative Part Number93893050
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Super HC® Molded Notch PowerBand® 3/5VX500 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 50 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
Carlon® E950GF Non-Metallic Reducer Bushing, 1-1/4 x 1 in, For Use With SCH 40/80 Conduit, PVC
For over 100 years the Thomas & Betts® brand has been recognized as the leading brand of electrical fittings. The innovation continues with numerous products and features for both ordinary and hazardous locations.
THIN SERIES BALL BEARING-NTN16011 >
24-OZ TIRE PUNCTURE SEALER WITH HOSE-RADM1128 >
32-OZ LIQUID FLOOR WAXAND SEALER-JWH627664 >
Dodge® 126175 211 Medium Duty Non-Expansion Single Lip Flanged Cartridge Ball Bearing Unit, 2 in Dia Bore, 5.38 in L Bolt Center-to-Center, 5.38 in Dia Bolt Circle, 4-Bolt Base/Piloted Flange Mount, 6.38 in OAL/Dia
Dodge® 126175 211 Medium Duty Non-Expansion Single Lip Flanged Cartridge Ball Bearing Unit, 2 in Dia Bore, 5.38 in L Bolt Center-to-Center, 5.38 in Dia Bolt Circle, 4-Bolt Base/Piloted Flange Mount, 6.38 in OAL/Dia
