Gates® Power Transmission Super HC® 5V1250 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 125 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053290783
-
Manufacturer Part Number5V1250
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness35/64 in
-
MaterialChloroprene
-
Top Width5/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter7.958 in
-
Section Size5V
-
Series9334
-
Number of Ribs1
-
Outside Length125 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
-
Alternative Part Number93341250
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Super HC® 5V1250 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 125 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Charlotte PVC 02118 0800, 1/2 in nominal, Spigot end style, SCH 40, PVC, Domestic
PVC Schedule 40 fitting that is for pressure systems where temperatures will not exceed 140° F. They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than
MURRAY SOLENOID-MED33331 >
Browning® Classical Gripbelt® 1026723 AK Series Type 3 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 5-1/4 in OD, 5.2 in (A)/4.66 in (3L) Dia Pitch, 3/4 in W Face
Browning® Classical Gripbelt® 1026723 AK Series Type 3 Single Groove Sheave, Finished Bore, 7/8 in Dia Bore, 5-1/4 in OD, 5.2 in (A)/4.66 in (3L) Dia Pitch, 3/4 in W Face
ROUND STICK-ON CLOCK-JWH583936 >
HCI Preferred Supplier 25011616 Hydraulic Elbow, 1-5/16-12 x 1 in Nominal, 37 deg SAE Male JIC Flare x MNPT, Steel
HCI Preferred Supplier 25011616 Hydraulic Elbow, 1-5/16-12 x 1 in Nominal, 37 deg SAE Male JIC Flare x MNPT, Steel
