Gates® Power Transmission Super HC® PowerBand® 5/5V1800 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 180 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053288414
-
Manufacturer Part Number5/5V1800
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness35/64 in
-
MaterialChloroprene
-
Top Width5/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter7.958 in
-
Section Size5V
-
Series9386
-
Number of Ribs5
-
Outside Length180 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
-
Alternative Part Number93865180
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Super HC® PowerBand® 5/5V1800 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 180 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Gates® Power Transmission PowerGrip® TL14H100 Heavy Duty Timing Pulley, 1/2 to 1-1/8 in Taper-Lock® Bore, 14 Grooves, 2.228 in Dia Pitch
PowerGrip Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts._x000D_
PAIR OF SIZE-12" YELLOW SLUSH BOOTS-BOO995363 >
3/4" -MALE PIPE THREADX1-1/2" STAINLESS STEEL NIPPLE-FIT3/4X11/2SSN >
Charlotte PVC 02117 0800, 1/2 in nominal, FNPT end style, SCH 40/STD, PVC, Domestic
PVC Schedule 40 fitting that is for pressure systems where temperatures will not exceed 140° F. They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than
FYH® UCFL205 25MM UCFL Cylindrical Flange Mount Ball Bearing Unit, 25 mm Dia Bore, 3-57/64 in L Bolt Center-to-Center, 5/8 in Dia Bolt Circle, 2-Bolt Flange Flange Mount, 1-5/8 in OAL/Dia
FYH® UCFL205 25MM UCFL Cylindrical Flange Mount Ball Bearing Unit, 25 mm Dia Bore, 3-57/64 in L Bolt Center-to-Center, 5/8 in Dia Bolt Circle, 2-Bolt Flange Flange Mount, 1-5/8 in OAL/Dia
