Gates® Power Transmission Super HC® PowerBand® 4/5V850 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 85 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053278484
-
Manufacturer Part Number4/5V850
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness35/64 in
-
MaterialChloroprene
-
Top Width5/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter7.958 in
-
Section Size5V
-
Series9386
-
Number of Ribs4
-
Outside Length85 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
-
Alternative Part Number93864085
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Super HC® PowerBand® 4/5V850 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 85 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Browning® Classical Gripbelt® 1025907 AK Series Type 1 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 2.2 in OD, 2.2 in (A)/1.66 in (3L) Dia Pitch, 21/32 in W Face
Browning® Classical Gripbelt® 1025907 AK Series Type 1 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 2.2 in OD, 2.2 in (A)/1.66 in (3L) Dia Pitch, 21/32 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
2-OZ JAR ORANGE GLOW ENAMEL PAINT-JWH777439 >
Browning® 767757 VF2S 100 Intermediate Duty Non-Expansion Flange Mount Ball Bearing Unit, 1-7/16 in Dia Bore, 3-15/16 in L Bolt Center-to-Center, 2-Bolt Flange Mount, 3-3/8 in OAL/Dia
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
3/8X3-1/2-BN 3/8" X 3-1/2" Black Nipple
3/8" X 3-1/2" BLACK NIPPLE-JPW3/8X31/2BN >
