Gates® Power Transmission Super HC® Molded Notch PowerBand® 5/3VX600 Heavy Duty Molded Notch V-Belt, 3VX Section, 3/8 in W Top, 60 in L Outside, 21/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
-
BrandGates® Power Transmission
-
UPC072053287288
-
Manufacturer Part Number5/3VX600
-
CountryUSA|Canada
-
Temperature Range-60 to 250 deg F
-
Thickness21/64 in
-
MaterialEPDM
-
Top Width3/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Minimum Pulley Diameter3.82 in
-
Section Size3VX
-
Series9388
-
Number of Ribs5
-
Outside Length60 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Patented ethylene material construction provides -60 to 250 deg F temperature range to resist belt cracking
-
Alternative Part Number93885060
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Super HC® Molded Notch PowerBand® 5/3VX600 Heavy Duty Molded Notch V-Belt, 3VX Section, 3/8 in W Top, 60 in L Outside, 21/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
HCI Preferred Supplier 2406128 Reducer/Expander, 1-1/16-12 x 3/4-16 Nominal, SAE 37 deg Female JIC Flare x Male JIC Flare, Steel
HCI Preferred Supplier 2406128 Reducer/Expander, 1-1/16-12 x 3/4-16 Nominal, SAE 37 deg Female JIC Flare x Male JIC Flare, Steel
1 -MALE PIPE THREADX5 METAL GALVANIZED NIPPLE
Browning® Classical Gripbelt® 3693728 B5V® Type 1 Web Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 7.28 in OD, 6.8 in (A)/7.3 in (B)/7.1 in (BV) Dia Pitch, 1 in W Face
Gates® Power Transmission Polyflex® 3M545 Light Duty V-Belt, 3M Section, 1/8 in W Top, 21.46 in L Outside, 3/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
Browning® Classical Gripbelt® 3693694 B5V® Type 1 Web Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 6.68 in OD, 6.2 in (A)/6.7 in (B)/6-1/2 in (BV) Dia Pitch, 1 in W Face
