Gates® Power Transmission Super HC® 3V1120 Banded Heavy Duty V-Belt, 3V Section, 3/8 in W Top, 112 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053267303
-
Manufacturer Part Number3V1120
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness21/64 in
-
MaterialChloroprene
-
Top Width3/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter3.82 in
-
Section Size3V
-
Series9332
-
Number of Ribs1
-
Outside Length112 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
-
Alternative Part Number93321120
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Gates® Power Transmission Super HC® 3V1120 Banded Heavy Duty V-Belt, 3V Section, 3/8 in W Top, 112 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
EZ Flow® & EZ Flow® II disposable filters are designed for protection of furnace and central air units in residential and light commercial applications. Construction of both models is identical except for the media retainer. The EZ Flow® features a metal media retainer on the downstream side while the EZ Flow® II has no media retainer. Instead, the media itself is adhered directly to the frame for non-metallic applications.
3-LB RUSTOLEUM AMBER SHELLAC READY TO USE, DRIES FAST TO A HARD CLEAR FILM-JWH783904 >
Gates® Power Transmission Polyflex® 5M775 Light Duty V-Belt, 5M Section, 3/16 in W Top, 30.51 in L Outside, 1/8 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
Browning® Gearbelt® 1054915 Type 2 Synchronous Timing Pulley With Flange, 1/4 to 9/16 in Bore, 1.317 in OD, 21 Grooves, 1.337 in Dia Pitch, 9/16 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
Browning® Classical Gripbelt® 1025840 AK Series Type 1 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 2 in OD, 2 in (A)/1.46 in (3L) Dia Pitch, 21/32 in W Face
Browning® Classical Gripbelt® 1025840 AK Series Type 1 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 2 in OD, 2 in (A)/1.46 in (3L) Dia Pitch, 21/32 in W Face
