Gates® Power Transmission Super HC® 3V1000 Banded Heavy Duty V-Belt, 3V Section, 3/8 in W Top, 100 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053267273
-
Manufacturer Part Number3V1000
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness21/64 in
-
MaterialChloroprene
-
Top Width3/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter3.82 in
-
Section Size3V
-
Series9332
-
Number of Ribs1
-
Outside Length100 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
-
Alternative Part Number93321000
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Super HC® 3V1000 Banded Heavy Duty V-Belt, 3V Section, 3/8 in W Top, 100 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
HCI Preferred Supplier 700561-06 761P Tube Insert, 3/8 in, Compression, Brass
HCI Preferred Supplier 700561-06 761P Tube Insert, 3/8 in, Compression, Brass
OIL SEALS-.394" X 1.575" X .276"-CHI10X40X7HMS4R>
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
NIBCO® 437-291 Reducing Bushing, 2-1/2 x 1-1/2 in Nominal, Spigot x Slip End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
The NIBCO 437-291 (NIBCO internal part number L17825YP) is a 2-1/2" x 1-1/2" PVC Schedule 40 Reducer Bushing. It is a plumbing fitting used to connect a larger 2-1/2" pipe or fitting down to a smaller 1-1/2" line. Key Technical Specifications Size Connections: 2-1/2 inch Spigot x 1-1/2 inch Slip (Socket). Connection Types: The Spigot (male) end fits directly into a 2-1/2" socket fitting, while the Slip (female) end accepts a 1-1/2" bare PVC pipe. Material & Rating: White Polyvinyl Chloride (PVC) conforming to Schedule 40 thickness standards.
1-1/4" -HOSEX#20 FLANGE 90 CODE 61-MHDN2020FL90 >
