Gates® Power Transmission Super HC® PowerBand® 5/3V710 Heavy Duty Non-Notched Raw Edge V-Belt, 3V Section, 3/8 in W Top, 71 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053287646
-
Manufacturer Part Number5/3V710
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness21/64 in
-
MaterialChloroprene
-
Top Width3/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Non-Notched Raw Edge
-
Minimum Pulley Diameter3.82 in
-
Section Size3V
-
Series9385
-
Number of Ribs5
-
Outside Length71 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
-
Alternative Part Number93855071
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Gates® Power Transmission Super HC® PowerBand® 5/3V710 Heavy Duty Non-Notched Raw Edge V-Belt, 3V Section, 3/8 in W Top, 71 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Gates® Power Transmission PowerGrip® 367L075 Light Timing Belt, 3/4 in W, 36-3/4 in OAL, 3/8 in Pitch, 98 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Gates® Power Transmission PowerGrip® 195L100 Light Timing Belt, 1 in W, 19-1/2 in OAL, 3/8 in Pitch, 52 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
1-1/2" -MALE PIPE THREADX12" STAINLESS STEEL NIPPLE-FIT11/2X12SSN >
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
