Gates® Power Transmission Super HC® PowerBand® 3/3V600 Heavy Duty Non-Notched Raw Edge V-Belt, 3V Section, 3/8 in W Top, 60 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053261424
-
Manufacturer Part Number3/3V600
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness21/64 in
-
MaterialChloroprene
-
Top Width3/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Non-Notched Raw Edge
-
Minimum Pulley Diameter3.82 in
-
Section Size3V
-
Series9385
-
Number of Ribs3
-
Outside Length60 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
-
Alternative Part Number93853060
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Gates® Power Transmission Super HC® PowerBand® 3/3V600 Heavy Duty Non-Notched Raw Edge V-Belt, 3V Section, 3/8 in W Top, 60 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Gates® Power Transmission MegaCrimp™ 16MJ-16MP G60 SAE to SAE Straight Adapter, 1-5/16-12 x 1-11-1/2 Nominal, 37 deg Male JIC Flare x Male NPTF, Steel, Import
Gates® MegaCrimp™ couplings are designed for use with Gates® wire braid hydraulic hoses to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented "C" insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimp™ coupling size can accommodate various one-and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection.
Gates® Power Transmission PowerGrip® 465H300 Heavy Timing Belt, 3 in W, 46-1/2 in OAL, 1/2 in Pitch, 93 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Coilhose® PE0417-100N Standard Pneumatic Tubing, 0.17 in ID x 1/4 in OD x 100 ft L, 0.04 in THK Wall, Polyethylene, Domestic
Coilhose® PE0417-100N Standard Pneumatic Tubing, 0.17 in ID x 1/4 in OD x 100 ft L, 0.04 in THK Wall, Polyethylene, Domestic
732161 DO-IT-BEST/BONIDE MOLEMAX 10LB GRANULAR ANIMAL REPELLENT
APPLY TO AREAS INFESTED WITH LAWN MOLES TO REPEL AND PREVENT ADDITIONAL DAMAGE. MADE WITH FAST DISPERSING CASTOR OIL. FAST-ACTING CASTOR OIL REPELS MOLES FROM TURF AREAS AND FROM PLANTING BEDS, REPEL MOLES, VOLES, GOPHERS, RABBITS, ARMADILLOS, SKUNKS AND MORE IN LAWNS, FLOWERBEDS, AND GARDENS
-JWH732161 >
Gates® Power Transmission MegaCrimp™ 16MB-16MJ G60 SAE to SAE Straight Adapter, 1-5/16-12 Nominal, Male O-Ring Boss™ x 37 deg Male JIC Flare, Steel, Import
Gates® MegaCrimp™ couplings are designed for use with Gates® wire braid hydraulic hoses to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented "C" insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimp™ coupling size can accommodate various one-and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection.
