Wedge Belts
Gates® Power Transmission Super HC® PowerBand® 5/8V2120 Banded Heavy Duty V-Belt, 8V Section, 1 in W Top, 212 in L Outside, 7/8 in THK, Chloroprene
The PowerBand® construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove.
Gates® Power Transmission Super HC® PowerBand® 6/3V400 Heavy Duty Non-Notched Raw Edge V-Belt, 3V Section, 3/8 in W Top, 40 in L Outside, 21/64 in THK, Chloroprene
The PowerBand® construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove.
Gates® Power Transmission Super HC® PowerBand® 6/5V1400 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 140 in L Outside, 35/64 in THK, Chloroprene
The PowerBand® construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove.
Gates® Power Transmission Super HC® PowerBand® 6/5V1800 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 180 in L Outside, 35/64 in THK, Chloroprene
The PowerBand® construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove.
Gates® Power Transmission Super HC® PowerBand® 8/5V800 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 80 in L Outside, 35/64 in THK, Chloroprene
The PowerBand® construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove.
Gates® Power Transmission Super HC® XP™ 5VXP1600 Heavy Duty Premium Notched V-Belt, 5VXP Section, 5/8 in W Top, 160 in L Outside, 35/64 in THK, EPDM
Introducing Gates® new patented high performance molded notch V-belt. Transmits an average 50% more horsepower than our standard Super HC® molded notch belts, which helps reduce the overall drive width, weight and cost.
Gates® Power Transmission Super HC® XP™ 5VXP1900 Heavy Duty Premium Notched V-Belt, 5VXP Section, 5/8 in W Top, 190 in L Outside, 35/64 in THK, EPDM
Introducing Gates® new patented high performance molded notch V-belt. Transmits an average 50% more horsepower than our standard Super HC® molded notch belts, which helps reduce the overall drive width, weight and cost.
JASON® 3VX560 Cogged Deep Wedge V-Belt, 3VX Section, 3/8 in W Top, 56 in L Outside, 7/8 in THK
JASON® 3VX560 Cogged Deep Wedge V-Belt, 3VX Section, 3/8 in W Top, 56 in L Outside, 7/8 in THK
JASON® BX54 Cogged Classical V-Belt, BX Section, 21/32 in W Top, 54 in L Outside, 13/32 in THK
JASON® BX54 Cogged Classical V-Belt, BX Section, 21/32 in W Top, 54 in L Outside, 13/32 in THK
Premium belts have the highest power density of any V-belt and stretch dramatically less than standard cross sections. That's why they're ideal for use on problem drives requiring high-impact strength and load-carrying power. Replaces several belts with the strength of a single belt. Banded belts feature a multiple layer tie band that provides excellent lateral rigidity to prevent belts from turning over or from coming off of the drive.
Recently Viewed
MCR Safety 9673L 9673 Dipped General Purpose Gloves, Work, L, 13 ga Nylon, Black/Gray, Knit Wrist Cuff, Foam Nitrile Coating, Resists: Abrasions, Cut, Puncture and Tear, Nylon Lining
MCR Safety NXG® Work Gloves 13 Gauge Gray Nylon Black Nitrile Foam Coated Palm and Fingertips NXG provides Premium quality, comfort and fit making it the best choice for long work days These styles are well suited for Multi-Industrial applications that require high dexterity and comfort. The 9673 features a seamless 13 gauge gray nylon shell and black nitrile foam dipped palm and fingers. This material is breathable and cool and offers comfort and grip.
MCR Safety 9676M UltraTech® 9676 General Purpose Gloves, Wing Thumb Style, M, Polyurethane Palm, 15 ga Dyneema®, Gray/White, Knit Wrist Cuff, Resists: Abrasion, Cut, Puncture and Tear, HPPE Lining
MCR Safety CutPro® 13-Gauge Dyneema® Diamond Technology Shell Cut Resistant Work Gloves Polyurethane (PU) Coated Palm and Fingertips Micro-particle boosted high strength fiber provides cool-touch comfort and maximum durability One of the most distinguishing characteristics of Dyneema® fiber is its cool-to-touch property. This fiber's inherent ability to dissipate body heat and pass moisture from the inside of the glove to the outside results in longer wear time, promoting greater hand protection. The 9676 features a 13-gauge Certified Dyneema® Diamond Technology shell with a rugged PU coating on the palm and fingertips. The cut-resistant properties of this glove, combined with its outstanding abrasion and puncture resistance, make it an excellent choice for tough jobs. (Vending Packaged option available - VP9676). If you are looking for the best cut-resistant gloves, look no further than MCR Safety's Cut Pro® cut-resistant options.
MCR Safety 9679M 9679 Dipped General Purpose Gloves, Work, M, Nitrile Palm, 13 ga Nylon, Gray/White, Knit Wrist Cuff, Resists: Abrasion, Cut, Puncture and Tear, Nylon Lining
MCR Safety NXG® Work Gloves 13 Gauge White Nylon Shell Gray Nitrile Coated Palm and Fingertips FDA Compliant Materials - Component materials comply with all federal regulations for food contact NXG provides Premium quality, comfort and fit making it the best choice for long workdays The next generation of gloves requires the next generation in manufacturing. MCR Safety’s state-of-the-art manufacturing facility produces premium NXG® brand gloves with advanced coatings, utilizes 21st-century manufacturing efficiencies, and does so with environmentally friendly production methods. Our NXG® styles are well suited for multi-industrial applications that require high dexterity and comfort and are manufactured on seamless knit liners that are flat dipped to reproduce the natural curved shape of the hand. As a result, workers benefit from less hand fatigue and greater productivity while performing detailed tasks to heavy duty jobs. The 9679 features a seamless 13 gauge white nylon shell and gray nitrile coated palm and fingertips that will enhance gripping power. If you are looking for the best work gloves, be sure to check out MCR Safety's NXG® options! To learn more, visit our NXG® landing page here.
MCR Safety B100L ForceFlex® B100 Premium Grade General Purpose Gloves, Work, Gunn Cut/Reinforced Style, Suede Synthetic Leather Palm, Black/Blue/Gray, Adjustable Cuff, Unlined Lining
The ForceFlex® multi-task line of gloves provide the ultimate back of hand impact protection while providing full flexibility and range of motion. The B100 full finger multitask style features ergonomically designed synthetic leather palm with rough grip palm pad, injection molded tpr padding on the back of hand and fingers for full dorsal metacarpal protection and extra tacky fingertips. The blue mesh fabric backing provides comfort and breathability.
MCR Safety 9637L 9637 Regular Weight General Purpose Gloves, Reversible Cut Style, L, Cotton/Polyester Palm, 7 ga 70% Cotton/30% Polyester, Gray, Knit Wrist Cuff, Uncoated Coating, Unlined Lining
Our multi-purpose string knit gloves come in various blends and weights. Economy, regular, and heavyweight gauge offerings are available. These gloves are suitable for general hand protection in light duty applications. The 9637 features a 7-ga gray cotton polyester blend that is excellent for laundering and hiding dirt.
MCR Safety 9676S UltraTech® 9676 General Purpose Gloves, Wing Thumb Style, Polyurethane Palm, 15 ga Dyneema®, Gray/White, Knit Wrist Cuff, Resists: Abrasion, Cut, Puncture and Tear, HPPE Lining
MCR Safety CutPro® 13-Gauge Dyneema® Diamond Technology Shell Cut Resistant Work Gloves Polyurethane (PU) Coated Palm and Fingertips Micro-particle boosted high strength fiber provides cool-touch comfort and maximum durability One of the most distinguishing characteristics of Dyneema® fiber is its cool-to-touch property. This fiber's inherent ability to dissipate body heat and pass moisture from the inside of the glove to the outside results in longer wear time, promoting greater hand protection. The 9676 features a 13-gauge Certified Dyneema® Diamond Technology shell with a rugged PU coating on the palm and fingertips. The cut-resistant properties of this glove, combined with its outstanding abrasion and puncture resistance, make it an excellent choice for tough jobs. (Vending Packaged option available - VP9676). If you are looking for the best cut-resistant gloves, look no further than MCR Safety's Cut Pro® cut-resistant options.
