Gates® Power Transmission Micro-V® 490J4 Heavy Duty V-Belt, J Section, 3/32 in W Top, 49 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
-
BrandGates® Power Transmission
-
UPC072053283969
-
Manufacturer Part Number490J4
-
CountryUSA
-
Thickness5/32 in
-
MaterialChloroprene
-
Top Width3/32 in
-
Reinforced MaterialPolyester
-
TypeHeavy Duty
-
Minimum Pulley Diameter3.183 in
-
Section SizeJ
-
Series9171
-
Number of Ribs4
-
Outside Length49 in
- Fiber reinforced ribs for excellent wear resistance
- High modulus, low stretch tensile member for added strength and dependability
- Smooth running for minimal vibration at high speeds
- Oil and heat-resistant, static conductivity
-
Alternative Part Number917104904
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Micro-V® 490J4 Heavy Duty V-Belt, J Section, 3/32 in W Top, 49 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
Gates® Power Transmission Micro-V® 300J16 Heavy Duty V-Belt, J Section, 3/32 in W Top, 30 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
MORSE® 22592 1680 Taper Pin Reamer, #5 Taper Pin, 0.2409 in Dia Small End, Straight Flute, Straight Shank
MORSE® 22592 1680 Taper Pin Reamer, #5 Taper Pin, 0.2409 in Dia Small End, Straight Flute, Straight Shank
Browning® 1012517 Type 15 Web Multiple Sheave, 1.38 to 3.625 in Split Taper Bore, 10.4 in OD, 6 Grooves, 10.4 in Dia Pitch, 6-1/4 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
FYH® UCP207 35MM UCP Normal Duty Pillow Block Unit, 35 mm Dia Bore, 5 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-9/16 in OAL 3-3/4 in OAH
FYH® UCP207 35MM UCP Normal Duty Pillow Block Unit, 35 mm Dia Bore, 5 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-9/16 in OAL 3-3/4 in OAH
Browning® 1061910 Type 13 Web Multiple Sheave, 1.13 to 3.75 in Split Taper Bore, 9-3/4 in OD, 4 Grooves, 9.65 in Dia Pitch, 3-1/16 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
