Gates® Power Transmission Micro-V® 240J4 Heavy Duty V-Belt, J Section, 3/32 in W Top, 24 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
-
BrandGates® Power Transmission
-
UPC072053252668
-
Manufacturer Part Number240J4
-
CountryUSA
-
Thickness5/32 in
-
MaterialChloroprene
-
Top Width3/32 in
-
Reinforced MaterialPolyester
-
TypeHeavy Duty
-
Minimum Pulley Diameter3.183 in
-
Section SizeJ
-
Series9171
-
Number of Ribs4
-
Outside Length24 in
- Fiber reinforced ribs for excellent wear resistance
- High modulus, low stretch tensile member for added strength and dependability
- Smooth running for minimal vibration at high speeds
- Oil and heat-resistant, static conductivity
-
Alternative Part Number917102404
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Micro-V® 240J4 Heavy Duty V-Belt, J Section, 3/32 in W Top, 24 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
Dodge® Tigear-2® 26S25R Size 26 Standard Right Angle Worm Gear Speed Reducer, Separate Input, Solid B Shaft Output, 2.26 hp, 25:1 Gear, 70 rpm Maximum Output, 1677 in-lb Torque Rating
The Tigear-2® is a right angle, single stage worm gear reducer with a rugged cast iron housing and power dense gearing design to ensure maximum reliability. Stainless Steel and the exclusive E-Z-Kleen® finish are available for tough washdown applications.
Dodge® Tigear-2® 202Q07R56 Size 20 Standard Right Angle Worm Gear Speed Reducer, Quill Input, Solid B Shaft Output, 7:1 Gear
The Tigear-2® is a right angle, single stage worm gear reducer with a rugged cast iron housing and power dense gearing design to ensure maximum reliability. Stainless Steel and the exclusive E-Z-Kleen® finish are available for tough washdown applications.
Gates® Power Transmission Micro-V® 230J4 Heavy Duty V-Belt, J Section, 3/32 in W Top, 23 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
Dodge® Tigear-2® 17Q05L56 Standard Right Angle Worm Gear Speed Reducer, Quill Input, Solid A Shaft Output, 2.59 hp, 5:1 Gear, 350 rpm Maximum Output, 430 in-lb Torque Rating
The speed reducer shall be a single reduction worm gear reducer incorporating three input configurations - a quill style for direct attachment of electric motors, a separate keyed input shaft suitable for flexible coupling to a footed motor or belt and pulley input configuration and a motor adapter style input that employs a three piece coupling to connect electric motors to the reducer. These input configurations shall be available in both solid and hollow output shaft designs. The reducer shall be manufactured in the United States of America.
Gates® Power Transmission Polyflex® JB® 3/11M1550JB Joined Band Light Duty V-Belt, 11M Section, 7/16 in W Top, 60.3 in L Outside, 9/32 in THK, High Modulus Polyurethane
Joined band belt construction provides increased belt stability, preventing belts from turning over or from coming off of the drive. Unique 60 deg angle polyurethane construction transmits greater loads at higher speeds in less space than conventional V-belts.
