Gates® Power Transmission Micro-V® 320J8 Heavy Duty V-Belt, J Section, 3/32 in W Top, 32 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
-
BrandGates® Power Transmission
-
UPC072053519648
-
Manufacturer Part Number320J8
-
CountryUSA
-
Thickness5/32 in
-
MaterialChloroprene
-
Top Width3/32 in
-
Reinforced MaterialPolyester
-
TypeHeavy Duty
-
Minimum Pulley Diameter3.183 in
-
Section SizeJ
-
Series9171
-
Number of Ribs8
-
Outside Length32 in
- Fiber reinforced ribs for excellent wear resistance
- High modulus, low stretch tensile member for added strength and dependability
- Smooth running for minimal vibration at high speeds
- Oil and heat-resistant, static conductivity
-
Alternative Part Number917103208
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Micro-V® 320J8 Heavy Duty V-Belt, J Section, 3/32 in W Top, 32 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
Browning® 767876 VPLS 100 Intermediate Duty Low Base Pillow Block Ball Bearing Unit, 1-11/16 in Dia Bore, 5-13/64 to 6-7/64 in L Bolt Center-to-Center, 2-1/16 in Base to Bore Centerline, 7-3/8 in OAL x 4-3/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Browning® 1060755 Type 13 Web Multiple Sheave, 3/4 to 2-11/16 in Split Taper Bore, 8 in OD, 4 Grooves, 7.95 in Dia Pitch, 1-29/32 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Gates® Power Transmission Micro-V® 550J3 Heavy Duty V-Belt, J Section, 3/32 in W Top, 55 in L Outside, 5/32 in THK, Polychloroprene Rubber
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
Coilhose® S38-12B Stowaway® S38 Heavy Duty Coiled Air Hose, 3/8 in Nominal, 3/8 in MPT Swivel End Style, 12 ft L, 230 psi at 70 deg F Working, Nylon, Domestic
Coilhose® S38-12B Stowaway® S38 Heavy Duty Coiled Air Hose, 3/8 in Nominal, 3/8 in MPT Swivel End Style, 12 ft L, 230 psi at 70 deg F Working, Nylon, Domestic
Browning® 1013382 Type 15 Arm Multiple Sheave, 1.13 to 3.75 in Split Taper Bore, 20.4 in OD, 4 Grooves, 20.4 in Dia Pitch, 4-1/4 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
