Gates® Power Transmission Micro-V® 300J16 Heavy Duty V-Belt, J Section, 3/32 in W Top, 30 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
-
BrandGates® Power Transmission
-
UPC072053268225
-
Manufacturer Part Number300J16
-
CountryUSA
-
Thickness5/32 in
-
MaterialChloroprene
-
Top Width3/32 in
-
Reinforced MaterialPolyester
-
TypeHeavy Duty
-
Minimum Pulley Diameter3.183 in
-
Section SizeJ
-
Series9171
-
Number of Ribs16
-
Outside Length30 in
- Fiber reinforced ribs for excellent wear resistance
- High modulus, low stretch tensile member for added strength and dependability
- Smooth running for minimal vibration at high speeds
- Oil and heat-resistant, static conductivity
-
Alternative Part Number917103016
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Micro-V® 300J16 Heavy Duty V-Belt, J Section, 3/32 in W Top, 30 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
MORSE® 22592 1680 Taper Pin Reamer, #5 Taper Pin, 0.2409 in Dia Small End, Straight Flute, Straight Shank
MORSE® 22592 1680 Taper Pin Reamer, #5 Taper Pin, 0.2409 in Dia Small End, Straight Flute, Straight Shank
Browning® 1012517 Type 15 Web Multiple Sheave, 1.38 to 3.625 in Split Taper Bore, 10.4 in OD, 6 Grooves, 10.4 in Dia Pitch, 6-1/4 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
FYH® UCP207 35MM UCP Normal Duty Pillow Block Unit, 35 mm Dia Bore, 5 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-9/16 in OAL 3-3/4 in OAH
FYH® UCP207 35MM UCP Normal Duty Pillow Block Unit, 35 mm Dia Bore, 5 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-9/16 in OAL 3-3/4 in OAH
Browning® 1061910 Type 13 Web Multiple Sheave, 1.13 to 3.75 in Split Taper Bore, 9-3/4 in OD, 4 Grooves, 9.65 in Dia Pitch, 3-1/16 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Dichtomatik 75102227 O-Ring, 329 Dash Number, 1.975 in ID x 2.395 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
