Gates® Power Transmission Polyflex® JB® 3/5M730JB Joined Band Light Duty V-Belt, 5M Section, 3/16 in W Top, 28.74 in L Outside, 1/8 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
-
BrandGates® Power Transmission
-
UPC72053262377
-
Manufacturer Part Number3/5M730JB
-
CountryUSA|Canada
-
Temperature Range-65 to 180 deg F
-
Thickness1/8 in
-
MaterialHigh Modulus Polyurethane
-
Top Width3/16 in
-
Reinforced MaterialPolyester
-
TypeJoined Band Light Duty
-
Minimum Pulley Diameter1.273 in
-
Section Size5M
-
Series8912
-
Number of Ribs3
-
Outside Length28.74 in
- High modulus polyurethane compound resists fatigue, wear, ozone and most environmental conditions
- Precise casting method eliminates layers and overlaps for smooth running and low vibration
- Ribbed backing provides greater lateral stability and relieves bending stress
- Joined belt construction provides high stability, preventing belts from turning over or coming off of the drive
-
Alternative Part Number89123730
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Polyflex® JB® 3/5M730JB Joined Band Light Duty V-Belt, 5M Section, 3/16 in W Top, 28.74 in L Outside, 1/8 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
TXT205T Dodge® Torque-Arm™ II 902003 Heavy Duty Single and Double Reduction Speed Reducer, Solid Shaft Input, Tapered Hollow Bore Output, 10 hp, 9:1 Gear
With 60 years of proven dependability and more than 1.8 million units in service throughout the world, Dodge® Torque-Arm™ speed reducers are the standard of the industry and the benchmark to which others are compared. The Torque-Arm™ II is a shaft mount helical gear reducer that mounts directly to the driven shaft with a number of accessories available to produce versatility, cost savings and long life. A long list of standard features makes this reducer suitable for a wide range of environments right off the shelf.
FYH® NANFL204 12 NANFL Standard Duty Flange Mount Ball Bearing Unit, 3/4 in Dia Bore, 3-17/32 in L Bolt Center-to-Center, 25/64 in Dia Bolt Circle, 2-Bolt Flange Flange Mount
FYH® NANFL204 12 NANFL Standard Duty Flange Mount Ball Bearing Unit, 3/4 in Dia Bore, 3-17/32 in L Bolt Center-to-Center, 25/64 in Dia Bolt Circle, 2-Bolt Flange Flange Mount
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
NATIONAL PIPE THREAD SWIVEL HYDRAULIC ADAPTER-FTG421212 >
Speakman® SE-400 Select Large Rectangular Eye/Face Wash Bowl, Wall Mount, Push Handle Operation, ANSI/ISEA Z358.1
The Speakman® select series SE-400 eye and face wash stainless steel bowl wall mount system features a full flood eye face wash configuration which has six aerated sprays for gentle yet thorough rinsing of the eyes and face in case of exposure to injurious materials. The soft aerated sprays allow users to comfortably flush their eyes for the ANSI recommended 15 minutes. A stainless steel push-handle activates these units. The SE-400 is a wall mounted unit with a stainless steel bowl and comes complete with a wall mount bracket. The SE-400 is compliant to the ANSI/ISEA Z358.1 standard.
