Gates® Power Transmission Polyflex® JB® 2/5M925JB Joined Band Light Duty V-Belt, 5M Section, 3/16 in W Top, 36.42 in L Outside, 1/8 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
-
BrandGates® Power Transmission
-
UPC72053246339
-
Manufacturer Part Number2/5M925JB
-
CountryUSA|Canada
-
Temperature Range-65 to 180 deg F
-
Thickness1/8 in
-
MaterialHigh Modulus Polyurethane
-
Top Width3/16 in
-
Reinforced MaterialPolyester
-
TypeJoined Band Light Duty
-
Minimum Pulley Diameter1.273 in
-
Section Size5M
-
Series8912
-
Number of Ribs2
-
Outside Length36.42 in
- High modulus polyurethane compound resists fatigue, wear, ozone and most environmental conditions
- Precise casting method eliminates layers and overlaps for smooth running and low vibration
- Ribbed backing provides greater lateral stability and relieves bending stress
- Joined belt construction provides high stability, preventing belts from turning over or coming off of the drive
-
Alternative Part Number89122925
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Polyflex® JB® 2/5M925JB Joined Band Light Duty V-Belt, 5M Section, 3/16 in W Top, 36.42 in L Outside, 1/8 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
1/4 in MNPT G-style Plugs are made of case hardened steel and are plated to resist rust. G-style Plugs offer a basic flow size of 1/2 in and a maximum pressure of 300 psi. With air flow of up to 99 scfm, G-style Plugs are perfect for applications that require more than 60 scfm.
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Browning® Classical Gripbelt® 1042662 BK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 12-3/4 in OD, 12.2 in (A)/12.7 in (B) Dia Pitch, 7/8 in W Face
Dupli-Color® Engine Enamel contains Ceramic Resins for maximum heat dissipation, gloss retention and protection from automotive fluids. Excellent for under-the-hood applications, Dupli-Color Engine Enamel will perform to the most rigorous standards of racing, street rod, and vehicle restoration enthusiasts. This durable formula resists temperatures up to 500 deg F intermittently and produces a superior finish that will not blister, flake, crack or peel.
