Gates® Power Transmission Polyflex® 5M1150 Light Duty V-Belt, 5M Section, 3/16 in W Top, 45.28 in L Outside, 1/8 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
-
BrandGates® Power Transmission
-
UPC72053289695
-
Manufacturer Part Number5M1150
-
CountryUSA|Canada
-
Temperature Range-65 to 180 deg F
-
Thickness1/8 in
-
MaterialHigh Modulus Polyurethane
-
Top Width3/16 in
-
Reinforced MaterialPolyester
-
TypeLight Duty
-
Minimum Pulley Diameter1.273 in
-
Section Size5M
-
Series8902
-
Number of Ribs1
-
Outside Length45.28 in
- High modulus polyurethane compound resists fatigue, wear, ozone and most environmental conditions
- Precise casting method eliminates layers and overlaps for smooth running and low vibration
- Ribbed backing provides greater lateral stability and relieves bending stress
- Unique 60 deg angle polyurethane construction transmits greater loads at higher speeds in less space than conventional V-belts
-
Alternative Part Number89021150
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Polyflex® 5M1150 Light Duty V-Belt, 5M Section, 3/16 in W Top, 45.28 in L Outside, 1/8 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
Gates® Power Transmission PowerGrip® 345L050 Light Timing Belt, 1/2 in W, 34-1/2 in OAL, 3/8 in Pitch, 92 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
14" X 20" X 1" PLEATED AIR FILTER
3/8" ID; 1/2" FEMALE JIC-SAE SWIVEL-FTGJS68 >
Gates® Power Transmission PowerGrip® HTD® P24-5M-15AL Sprocket, 1/4 to 11/16 in Rough Stock Bore, 1.459 in OD, 24 Grooves, 1.504 in Dia Pitch, 0.547 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
3/8X1-1/2-SSN 3/8" -male Pipe Threadx1-1/2" Stainless Steel Nipple
3/8" -MALE PIPE THREADX1-1/2" STAINLESS STEEL NIPPLE-FIT3/8X11/2SSN >
