Gates® Power Transmission Polyflex® 5M325 Light Duty V-Belt, 5M Section, 3/16 in W Top, 12.8 in L Outside, 1/8 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
-
BrandGates® Power Transmission
-
UPC072053289893
-
Manufacturer Part Number5M325
-
CountryUSA
-
Temperature Range-65 to 180 deg F
-
Thickness1/8 in
-
MaterialHigh Modulus Polyurethane
-
Top Width3/16 in
-
Reinforced MaterialPolyester
-
TypeLight Duty
-
Minimum Pulley Diameter1.273 in
-
Section Size5M
-
Series8902
-
Number of Ribs1
-
Outside Length12.8 in
- High modulus polyurethane compound resists fatigue, wear, ozone and most environmental conditions
- Precise casting method eliminates layers and overlaps for smooth running and low vibration
- Ribbed backing provides greater lateral stability and relieves bending stress
- Unique 60 deg angle polyurethane construction transmits greater loads at higher speeds in less space than conventional V-belts
-
Alternative Part Number89020325
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Polyflex® 5M325 Light Duty V-Belt, 5M Section, 3/16 in W Top, 12.8 in L Outside, 1/8 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
Gates® Power Transmission MegaCrimp™ 4MP-4MP G60 SAE to SAE Straight Adapter, 1/4-18 Nominal, Male NPTF, Steel, Import
Gates® MegaCrimp™ couplings are designed for use with Gates® wire braid hydraulic hoses to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented "C" insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimp™ coupling size can accommodate various one-and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection.
PIP® 3575/XXXL Standard Weight Disposable Coverall, 3XL, Navy Blue, Polypropylene, 30 in Chest, 32-1/2 in L Inseam
Spun bound polypropylene offers light weight protection against dry particulates, keeping dirt and debris offs the body. Good for use in general labor, pharmaceuticals, cleaning and food processing.
1/2" -MALE PIPE THREADX6" SCHEDULE 80 BLACK NIPPLE-FIT1/2X6XHBN >
1-1/2" X NPT X 11/2" NPSH ADAPTER-DXNDMH1515>
Browning® 767878 VPS 200 Normal Duty Pillow Block Ball Bearing, 15/16 in Dia Bore, 3-23/32 to 4-17/32 in L Bolt Center-to-Center, 1-7/16 in Base to Bore Centerline, 5-1/2 in OAL x 2-13/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
