Gates® Power Transmission Polyflex® 3M560 Light Duty V-Belt, 3M Section, 1/8 in W Top, 22.05 in L Outside, 3/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
-
BrandGates® Power Transmission
-
UPC072053266450
-
Manufacturer Part Number3M560
-
CountryUSA
-
Temperature Range-65 to 180 deg F
-
Thickness3/32 in
-
MaterialHigh Modulus Polyurethane
-
Top Width1/8 in
-
Reinforced MaterialPolyester
-
TypeLight Duty
-
Minimum Pulley Diameter0.955 in
-
Section Size3M
-
Series8901
-
Number of Ribs1
-
Outside Length22.05 in
- High modulus polyurethane compound resists fatigue, wear, ozone and most environmental conditions
- Precise casting method eliminates layers and overlaps for smooth running and low vibration
- Ribbed backing provides greater lateral stability and relieves bending stress
- Unique 60 deg angle polyurethane construction transmits greater loads at higher speeds in less space than conventional V-belts
-
Alternative Part Number89010560
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Gates® Power Transmission Polyflex® 3M560 Light Duty V-Belt, 3M Section, 1/8 in W Top, 22.05 in L Outside, 3/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
United Abrasives-SAIT 57024 Close Coated General Purpose Abrasive Disc, 7 in Dia, 7/8 in Center Hole, 24 Grit, 2A Aluminum Oxide Abrasive
United Abrasives-SAIT 57024 Close Coated General Purpose Abrasive Disc, 7 in Dia, 7/8 in Center Hole, 24 Grit, 2A Aluminum Oxide Abrasive
Gates® Power Transmission Micro-V® 865L6 Heavy Duty V-Belt, L Section, 3/16 in W Top, 86-1/2 in L Outside, 1/4 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
Browning® 767612 VTBS 200 Normal Duty Pillow Block Ball Bearing, 1-1/4 in Dia Bore, 3 in L Bolt Center-to-Center, 1-11/16 in Base to Bore Centerline, 4 in OAL x 3-3/8 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Morse® Raider® Plus XH1208 Single Reduction Standard Worm Gear Reducer, C-Face Quilled Input, Double Solid Shaft Output, 1 hp, 40:1 Gear Ratio, 43.7 rpm Maximum Output, 81.03 in-lb Input/43.7 in-lb Output Torque Rating
Raider® Plus worm gear reducers represent the most flexible worm gear product in the power transmission solutions portfolio. With a large variety of add-on accessories, the Raider® Plus line of worm gear reducers is a problem solver. Four unit styles form the basis of this vast product offering. These are the universal style (U style, shaft input) with an output shaft and the C-face style (Q style, input quill) with an output shaft. Both the U and Q styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors.
3/4" -MALE PIPE THREADX5" BLACK NIPPLE-FIT3/4X5BN >
