Gates® Power Transmission Polyflex® 3M530 Light Duty V-Belt, 3M Section, 1/8 in W Top, 20.87 in L Outside, 3/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
-
BrandGates® Power Transmission
-
UPC072053266429
-
Manufacturer Part Number3M530
-
CountryUSA
-
Temperature Range-65 to 180 deg F
-
Thickness3/32 in
-
MaterialHigh Modulus Polyurethane
-
Top Width1/8 in
-
Reinforced MaterialPolyester
-
TypeLight Duty
-
Minimum Pulley Diameter0.955 in
-
Section Size3M
-
Series8901
-
Number of Ribs1
-
Outside Length20.87 in
- High modulus polyurethane compound resists fatigue, wear, ozone and most environmental conditions
- Precise casting method eliminates layers and overlaps for smooth running and low vibration
- Ribbed backing provides greater lateral stability and relieves bending stress
- Unique 60 deg angle polyurethane construction transmits greater loads at higher speeds in less space than conventional V-belts
-
Alternative Part Number89010530
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Polyflex® 3M530 Light Duty V-Belt, 3M Section, 1/8 in W Top, 20.87 in L Outside, 3/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
1/2" CLOSE SCHEDULE 80 BLACK NIPPLE-FIT1/2XCLXHBN >
3/8" X 1-1/2" GALVANIZED NIPPLES-JPW3/8X11/2GN>
Coilhose® NC0435-100N Standard Nylon Tubing, 0.18 in ID x 1/4 in OD x 100 ft L, 0.035 in THK Wall, Domestic
Coilhose® NC0435-100N Standard Nylon Tubing, 0.18 in ID x 1/4 in OD x 100 ft L, 0.035 in THK Wall, Domestic
Dupli-Color® EDE160507 Engine Enamel With Ceramic™, 12 oz Container, Liquid Form, Ford Red
Dupli-Color® Engine Enamel contains Ceramic Resins for maximum heat dissipation, gloss retention and protection from automotive fluids. Excellent for under-the-hood applications, Dupli-Color Engine Enamel will perform to the most rigorous standards of racing, street rod, and vehicle restoration enthusiasts. This durable formula resists temperatures up to 500 deg F intermittently and produces a superior finish that will not blister, flake, crack or peel.
Dupli-Color® EDE161707 Engine Enamel With Ceramic™, 12 oz Container, Liquid Form, Ford Green
Dupli-Color® Engine Enamel contains Ceramic Resins for maximum heat dissipation, gloss retention and protection from automotive fluids. Excellent for under-the-hood applications, Dupli-Color Engine Enamel will perform to the most rigorous standards of racing, street rod, and vehicle restoration enthusiasts. This durable formula resists temperatures up to 500 deg F intermittently and produces a superior finish that will not blister, flake, crack or peel.
