Gates® Power Transmission Polyflex® 11M850 Light Duty V-Belt, 11M Section, 7/16 in W Top, 33.46 in L Outside, 9/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
-
BrandGates® Power Transmission
-
UPC072053225297
-
Manufacturer Part Number11M850
-
CountryUSA
-
Temperature Range-65 to 180 deg F
-
Thickness9/32 in
-
MaterialHigh Modulus Polyurethane
-
Top Width7/16 in
-
Reinforced MaterialPolyester
-
TypeLight Duty
-
Minimum Pulley Diameter3.82 in
-
Section Size11M
-
Series8904
-
Number of Ribs1
-
Outside Length33.46 in
- High modulus polyurethane compound resists fatigue, wear, ozone and most environmental conditions
- Precise casting method eliminates layers and overlaps for smooth running and low vibration
- Ribbed backing provides greater lateral stability and relieves bending stress
- Unique 60 deg angle polyurethane construction transmits greater loads at higher speeds in less space than conventional V-belts
-
Alternative Part Number89040850
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Polyflex® 11M850 Light Duty V-Belt, 11M Section, 7/16 in W Top, 33.46 in L Outside, 9/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
Gates® Power Transmission Micro-V® 480J6 Heavy Duty V-Belt, J Section, 3/32 in W Top, 48 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
Browning® 1061738 Type 15 Web Multiple Sheave, 1.38 to 3.625 in Split Taper Bore, 8-1/2 in OD, 8 Grooves, 8.4 in Dia Pitch, 5-13/16 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
FYH® EAF205 14 EAF Normal Duty Flange Mount Ball Bearing Unit, 4-Bolt Flange Flange Mount
FYH® EAF205 14 EAF Normal Duty Flange Mount Ball Bearing Unit, 4-Bolt Flange Flange Mount
Gates® Power Transmission Micro-V® 520J16 Heavy Duty V-Belt, J Section, 3/32 in W Top, 52 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
DeWALT® 01205-PWR Long Shell Expansion Anchor, 1/2 in Dia, 2 in OAL, 3/4 in Drill, Zamac Alloy
The Lag Shield™ is a screw style anchor designed for use with lag bolts. It is suitable for use in concrete and the mortar joints of block or brick walls. In harder masonry materials, short style Lag Shield™ are used to reduce drilling time. The long style version is used in soft or weak masonry to better develop strength. The Lag Shield™ is not recommended for overhead or life safety applications.
