Gates CX-90 Tri-Power® Industrial V-Belts - CX Section, 7/8 in Top Width, 1 Strand, 94.0000 in Nominal Outside Length, Cogged
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
-
BrandGates® Power Transmission
-
UPC072053015874
-
Manufacturer Part NumberCX90
-
CountryUSA|Canada
-
Temperature Range-70 to 250 deg F
-
Thickness17/32 in
-
MaterialEPDM
-
Top Width7/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
ColorBlack
-
TypeHeavy Duty Molded Notch
-
Section SizeCX
-
Series9014
-
Number of Ribs1
-
Outside Length94 in
-
Minimum Pulley Diameter7.958 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- Belt edge is machined for even sheave groove contact resulting in smoother running, less slip and wear
- Patented ethylene material construction provides -70 to 250 deg F temperature range to resist belt cracking
-
UNSPSC26111801
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Alternative Part Number90142090
-
Package DescriptionEACH
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Gates CX-90 Tri-Power® Industrial V-Belts - CX Section, 7/8 in Top Width, 1 Strand, 94.0000 in Nominal Outside Length, Cogged
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
MORSE® 29147 1655H Chucking Reamer, 0.117 in Dia x 3-1/2 in OAL, 0.112 in Dia Straight Shank, Straight Flute
99_100x100.jpg)
HEAVY DUTY LEVERAGE TOOL FOR PULLING POST, AND ALL KINDS OF STAKES. CONSTRUCTED OF HEAVY GAUGE STEEL, THE PULLER EASILY ATTACHES TO MOST POSTS OR STAKES IN SECONDS. IDEAL BALANCE MAXIMIZES LEVERAGE WHILE MINIMIZING EFFORT. PULLS A VARIETY OF STAKES AND IS MADE OF HEAVY GAUGE STEEL CONSTRUCTION
-JWH707664>
WATTS® 0372271 530 Calibrated Pressure Relief Valve, 3/4 in Nominal, MNPT x FNPT End Style, 300 psi Pressure, Brass Body
This 3/4 inch calibrated pressure relief valve is used in commercial, residential and industrial applications to protect against excessive pressure in systems containing water, oil, or air. It consists of a bronze body construction with 3/4 inch NPT threaded male inlet and 1/2 inch NPT threaded female (drain) outlet connections, stainless steel spring, brass bonnet, Buna-N disc, and Buna-N O-ring. Series 530C has a calibrated adjustment feature for setting the valve to the required relief pressure, and is ideal for bypass thermal expansion pressure relief (not ASME approved). It is for use in fire protection systems. The maximum pressure is300 psi (20.67 bar). The adjustable pressure range is 50 to 175 psi (3.45 to 12.06 bar).
FYH® UCP210-32 Pillow Block Unit, 2 in Dia Bore, 6-1/4 in L Bolt Center-to-Center
FYH® UCP210-32 Pillow Block Unit, 2 in Dia Bore, 6-1/4 in L Bolt Center-to-Center
GREEN AND BLACK FRAME UNITARY LENS-FOR55285 >
