Gates CX-85 Tri-Power® Industrial V-Belts - CX Section, 7/8 in Top Width, 1 Strand, 89.0000 in Nominal Outside Length, Cogged
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
-
BrandGates® Power Transmission
-
UPC72053267211
-
Manufacturer Part NumberCX85
-
CountryUSA|Canada
-
Temperature Range-70 to 250 deg F
-
Thickness17/32 in
-
MaterialEPDM
-
Top Width7/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
ColorBlack
-
TypeHeavy Duty Molded Notch
-
Section SizeCX
-
Series9014
-
Number of Ribs1
-
Outside Length89 in
-
Minimum Pulley Diameter7.958 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- Belt edge is machined for even sheave groove contact resulting in smoother running, less slip and wear
- Patented ethylene material construction provides -70 to 250 deg F temperature range to resist belt cracking
-
UNSPSC26111801
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Alternative Part Number90142085
-
Package DescriptionEACH
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates CX-85 Tri-Power® Industrial V-Belts - CX Section, 7/8 in Top Width, 1 Strand, 89.0000 in Nominal Outside Length, Cogged
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
Browning® 1045541 VP Series Type 2 Variable Pitch Sheave, 1-1/8 in Finished Bore, 6 in OD, 1 Groove, 4.4 to 5.4 in (A/4L)/4.7 to 5.9 in (B/5L/5V) Dia Pitch, 7/8 to 1-1/4 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
Rust-Oleum High Performance 2300 System Inverted Striping Spray Paint creates bright, sharp and long-lasting lines for a variety of surfaces. This oil-based paint is ideal for parking lots, warehouse aisles, pallet positions, stadiums and more.
Rubbermaid® BRUTE® FG352600GRAY Utility Waste Container, 28 gal Capacity, Squared, 22-1/2 in H, Plastic, Gray
The Rubbermaid Commercial square BRUTE® container, is designed with professional-grade, heavy-duty plastic that won't rust, chip, or fade. These containers have reinforced rims, molded grips for easy lifting, and anti-jam nesting for easy storage.
Pearl® XTREME™ PX-4000™ is a revolutionary line of diamond wheels for metal applications. It is designed to cut metal, stainless steel and a variety of ferrous metal with less odor and debris compared to conventional abrasives. The Pearl® XTREME™ PX-4000™ is engineered with a high concentration of diamonds with an extremely strong bond. The Pearl® XTREME™ PX-4000™ features fast cutting speed compared to conventional bonded abrasives and much longer life. It is extremely efficient because it reduces the need to change wheels frequently, which increases productivity dramatically. In addition, the shape of the wheel does not change overtime; therefore, the depth of cut remains the same from the first cut to the final cut.
1 X 3/4-BE, 1"-fpt X 3/4" Fpt 90-d Black Elbow
1"-FPT X 3/4" FPT 90-D BLACK ELBOW-JPW1X3/4BE>
