Gates NOTCHED GRIP V-BELTS GAT BX-136
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
-
BrandGates® Power Transmission
-
UPC72053267129
-
Manufacturer Part NumberBX136
-
CountryUSA|Canada
-
Temperature Range-70 to 250 deg F
-
Thickness13/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialFlex-Bonded Polyester
-
ColorBlack
-
TypeHeavy Duty Molded Notch
-
Section SizeBX
-
Series9013
-
Number of Ribs1
-
Outside Length139 in
-
Minimum Pulley Diameter4.775 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- Belt edge is machined for even sheave groove contact resulting in smoother running, less slip and wear
- Patented ethylene material construction provides -70 to 250 deg F temperature range to resist belt cracking
-
UNSPSC26111801
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Alternative Part Number90132136
-
Package DescriptionEACH
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
Browning® 1045228 VP Series Type 1 Variable Pitch Sheave, 1/2 in Finished Bore, 2-1/2 in OD, 1 Groove, 1.6 to 2.4 in Dia Pitch, 17/32 to 25/32 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
BBI 221157 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 1/2 in Dia x 5 in L Shoulder, 3/8-16
BBI 221157 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 1/2 in Dia x 5 in L Shoulder, 3/8-16
Browning® Gearbelt® 1057355 Type 11 Synchronous Flanged Pulley, 3/4 to 2-11/16 in Split Taper Bore, 5.039 in OD, 32 Grooves, 5.093 in Dia Pitch, 2.281 in W Face
Browning® Gearbelt® 1057355 Type 11 Synchronous Flanged Pulley, 3/4 to 2-11/16 in Split Taper Bore, 5.039 in OD, 32 Grooves, 5.093 in Dia Pitch, 2.281 in W Face
Dodge® 023014 207 Type E-Xtra Pillow Block Roller Bearing Unit, 2-1/2 in Dia Bore, 8.38 to 8.63 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 10-1/2 in OAL 5-1/2 in OAH
Dodge® 023014 207 Type E-Xtra Pillow Block Roller Bearing Unit, 2-1/2 in Dia Bore, 8.38 to 8.63 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 10-1/2 in OAL x 5-1/2 in OAH
9/16" -IDX3/4" -OD VITON O-RING


