Gates NOTCHED GRIP V-BELTS GAT BX-56
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
-
BrandGates® Power Transmission
-
UPC72053203745
-
Manufacturer Part NumberBX56
-
CountryUSA|Canada
-
Temperature Range-60 to 250 deg F
-
Thickness13/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialPolyester
-
ColorBlack
-
TypeHeavy Duty
-
Section SizeBX
-
Series9013
-
Number of Ribs1
-
Outside Length59 in
- Notches molded into the belt during manufacturing make this belt well suited for drives with smaller diameter sheaves
- Belt edge is machined for even sheave groove contact resulting in less slip and wear
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Patented EPDM Material construction provides -60 to 250 deg F temperature range to resist belt cracking
- Suitable for all industrial applications, particularly where small or sub-minimal sheave diameters are required
- Meets RMA oil and heat resistant standards
- Meets RMA static conductivity requirements
- Multi-duty recommended sheaves
- ARPM number: BX56
-
UNSPSC26101400
-
Standards/ApprovalsRMA Standard
-
Alternative Part Number90132056
-
Package DescriptionEACH
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
MORSE® 22110 1655 Chucking Reamer, 1/16 in Dia x 2-1/2 in OAL, 0.0585 in Dia Straight Shank, Straight Flute
537071 DO-IT-BEST/BROAN 200 CFM 8.5 SONES 120V VERTICAL DISCHARGE BATH EXHAUST FAN
THE BROAN 200 CFM EXHAUST FAN IS DEAL FOR PROBLEM ROOMS, SUCH AS LAUNDRY ROOMS, KITCHENS, OR RECREATIONAL ROOMS. THE FAN'S PERMANENTLY LUBRICATED MOTOR OPERATES AT 8.5 SONES FOR LIMITED DISTRIBUTION. THE FAN FEATURES DURABLE GALVANIZED STEEL HOUSING AND A WHITE POLYMERICA GRILL THAT CAN BE PAINTED TO MATCH ANY ROOM'S DECOR. FOR FAST INSTALLATION, THE FAN OFFERS STEEL MOUNTING BRACKETS WITH KEYHOLE SLOTS.
JWH537071 >
Champion SA80-3/4 Car/Maintenance Reamer, 3/4 in Dia x 6-3/4 in OAL, 1/2 in Dia Straight Shank, Left Helical Flute
Champion SA80-3/4 Car/Maintenance Reamer, 3/4 in Dia x 6-3/4 in OAL, 1/2 in Dia Straight Shank, Left Hand Helix Flute
SATCO® S3601 Dimmable General Service Reflective Lamp, 25 W, E26 Incandescent Lamp, R14 Stubby Shape, 135 Lumens Initial
Incandescent lamps represent the original lighting technology, remaining virtually unchanged since their invention in the mid 19th century and the lighting technology SATCO® was founded upon. This is the technology most everyone has become familiar with and the baseline comparison for all other lighting technologies. As the incandescent bulb becomes more and more regulated, SATCO® remains on the cutting edge of new lighting technologies. Still, we remain well stocked with incandescent lamps in a multitude of wattages, base sizes and shapes for every application.
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
