Gates® Power Transmission Hi-Power® II CC81 Banded Heavy Duty Double V-Belt, CC Section, 7/8 in W Top, 85 in L Outside, 23/32 in THK, EPDM
This belt is designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for drives that require power transmission from both sides of the belt.
-
BrandGates® Power Transmission
-
UPC072053208207
-
Manufacturer Part NumberCC81
-
CountryUSA
-
Temperature Range-30 to 140 deg F
-
Thickness23/32 in
-
MaterialEPDM
-
Top Width7/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
ColorBlack
-
TypeBanded Heavy Duty
-
Section SizeCC
-
Series9054
-
Number of Ribs1
-
Outside Length85 in
-
Minimum Pulley Diameter7.958 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
-
UNSPSC26111801
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Alternative Part Number90540081
-
Package DescriptionEACH
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Hi-Power® II CC81 Banded Heavy Duty Double V-Belt, CC Section, 7/8 in W Top, 85 in L Outside, 23/32 in THK, EPDM
This belt is designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for drives that require power transmission from both sides of the belt.
Makita® 5007F Circular Saw Kit, 7-1/4 in Blade, 5/8 in Arbor/Shank, 1-3/4 in at 45 deg, 2-3/8 in at 90 deg Cutting, Right Blade Side
Makita® engineered the 7-1/4 in circular saw (model 5007F) with pro framers in mind, combining power and performance with ease-of-use features, superior balance, and job site durability. The 5007F is ideal for a range of framing and cutting applications. Makita® built 15 A motor the 5007F has a powerful 15 A motor and a high power-to-weight ratio, with all ball bearing construction and a heavy gauge aluminum wraparound base engineered for improved durability and straighter cuts. The 5007F has a large cutting capacity (2-3/8 in at 90 deg, 1-3/4 in at 45 deg) with a maximum bevel capacity of 0 to 45 deg for the most common angles. Ease-of-use features Makita® engineered ease-of-use features into the saw with large and easy-to-read markings on the depth and bevel scales. Blade changes are more convenient with a flat motor housing design for increased stability when changing blades, with a conveniently located shaft lock for easy blade replacement. Visibility is improved with two built-in LED lights and a built-in dust blower engineered to clear the line of cut. Includes carbide tipped framing blade the 5007F includes a Makita® 7-1/4 in 24T general contractor framing blade for faster, cleaner cuts. The carbide tips are specifically set to withstand the harshest conditions such as plowing through nail-embedded wood. The blade is designed with special Makita® heat vents strategically set to dissipate heat and increase cutting performance. The 5007F also includes a blade wrench attached to the saw for fast and convenient blade changing. Engineered for a range of applications the 5007F is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, masons, carpenters, and general contractors seeking a best-in-class 7-1/4 in circular saw.
MARXMAN™ 85004 330QI General Purpose Jobber Length Drill Bit, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MARXMAN™ 85004 330QI General Purpose Jobber Length Drill Bit, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
Milwaukee® 6370-21 Grounded Corded Circular Saw Kit, 8 in Dia Blade, 5/8 in Arbor/Shank, 2-9/16 in at 90 deg Cutting, Right Blade Side
Milwaukee's 8 in. metal cutting circular saw delivers faster, cooler, cleaner, more affordable metal cutting. Forget the showers of hot metal chips and sparks that were once an aerial threat on metal construction jobsites. The 6370 shears the metal, producing a virtually spark-free wake and cool, burr and scorch-free edges that don't require post-cut finishing. Cool cut waste, in the form of metal shavings, is effectively contained with a durable magnesium blade shield and channeled into the saw's integral chip tank. Cool cutting also means that materials can be handled almost immediately following a cut, reducing downtime.
National Hardware® N129-171 Extra Heavy Duty T-Hinge, 23 lb Capacity, Hot Rolled Steel, Zinc Plated
National Hardware® N129-171 Extra Heavy Duty T-Hinge, 23 lb Capacity, Hot Rolled Steel, Zinc Plated
MORSE® 32311 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1/2-13 Thread, H3 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
MORSE® 32311 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1/2-13 Thread, H3 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
