Gates® Power Transmission Hi-Power® II CC120 Banded Heavy Duty Double V-Belt, CC Section, 7/8 in W Top, 124 in L Outside, 23/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
-
BrandGates® Power Transmission
-
UPC72053207897
-
Manufacturer Part NumberCC120
-
CountryUSA|Canada
-
Thickness23/32 in
-
MaterialEPDM
-
Top Width7/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter7.958 in
-
Section SizeCC
-
Series9054
-
Number of Ribs1
-
Outside Length124 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
-
Alternative Part Number90540120
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Hi-Power® II CC120 Banded Heavy Duty Double V-Belt, CC Section, 7/8 in W Top, 124 in L Outside, 23/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
Gates® Power Transmission Hi-Power® II A197 Banded Heavy Duty V-Belt, A Section, 1/2 in W Top, 199 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Gates® Power Transmission MegaCrimp™ 4G-2MP G25 Straight Hydraulic Coupling, 1/4 in x 1/8-27 Nominal, Hose x Male NPTF, Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
MCR Safety VCL2MLS Luminator® Standard Safety Vest, Small, Fluorescent Lime, Polyester, Hook and Loop Front Closure, 3 Pockets, ANSI Class: Class 2, ANSI/ISEA 107-2020 Type R
MCR Safety VCL2MLS Luminator® Standard Safety Vest, Small, Fluorescent Lime, Polyester, Hook and Loop Front Closure, 3 Pockets, ANSI Class: Class 2, ANSI/ISEA 107-2020 Type R
50-MM-ID LOW PILLOW BLOCK UNIT-FYHNAPK21050MM >
