Gates® Power Transmission Hi-Power® II BB85 Banded Heavy Duty Double V-Belt, BB Section, 21/32 in W Top, 88 in L Outside, 17/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
-
BrandGates® Power Transmission
-
UPC72053203646
-
Manufacturer Part NumberBB85
-
CountryUSA|Canada
-
Thickness17/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter5.73 in
-
Section SizeBB
-
Series9053
-
Number of Ribs1
-
Outside Length88 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
-
Alternative Part Number90530085
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Hi-Power® II BB85 Banded Heavy Duty Double V-Belt, BB Section, 21/32 in W Top, 88 in L Outside, 17/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
1-3/8" NICKEL-PLATED PILLOW BLOCK-FYHNAPK20722NP >
50-B-40-F115/16 40 Tooth Sprockets For #50
40 TOOTH SPROCKETS FOR #50 CHAIN-IDC50B40F115/16 >
2-1/2" X 6" TIE-ROD HYD/CYLINDERS>
Gates® Power Transmission Hi-Power® II BB75 Banded Heavy Duty Double V-Belt, BB Section, 21/32 in W Top, 78 in L Outside, 17/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
Gates® Power Transmission Poly Chain® GT®2 8MX-71S-62 Synchronous Sprocket, 7/8 to 3-1/4 in Taper-Lock® Bore, 7.06 in OD, 71 Grooves, 7.118 in Dia Pitch, 2.91 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
