Gates® Power Transmission Hi-Power® II BB136 Banded Heavy Duty Double V-Belt, BB Section, 21/32 in W Top, 139 in L Outside, 17/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
-
BrandGates® Power Transmission
-
UPC072053203141
-
Manufacturer Part NumberBB136
-
CountryUSA|Canada
-
Thickness17/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter5.73 in
-
Section SizeBB
-
Series9053
-
Number of Ribs1
-
Outside Length139 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
-
Alternative Part Number90530136
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Hi-Power® II BB136 Banded Heavy Duty Double V-Belt, BB Section, 21/32 in W Top, 139 in L Outside, 17/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
MCR Safety F2114 Frostbite® 2 Dual Lens Safety Glasses, Duramass® Hard Coat, Amber Lens, Full-Frame Frame, Frosted Black, Nylon Frame, Polycarbonate Lens, ANSI Z87+
Gates® Power Transmission Hi-Power® II BB158 Banded Heavy Duty Double V-Belt, BB Section, 21/32 in W Top, 161 in L Outside, 17/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
The Crescent Nicholson single-cut, bastard-cut angled lathe files are ideal for filing down significant amounts of wood or soft metals from a lathe-turned object. The bastard-cut coarseness design removes material aggressively, cutting faster than a regular mill file, but leaves a smoother finish because of the single-cut pattern. The rectangular shape and large size of these files are perfect for large-scale jobs where precision is key.
Dremel® 407 Sanding Drum, 1/2 in Dia x 1/2 in L, 1/8 in Dia Shank, 15000 rpm
PE064-100K by Coilhose | Tubing | 3/8" OD x .250" ID | .062" Wall thickness | Black | Polyethylene | 100ft
