Gates® Power Transmission Hi-Power® II BB103 Banded Heavy Duty Double V-Belt, BB Section, 21/32 in W Top, 106 in L Outside, 17/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
-
BrandGates® Power Transmission
-
UPC72053489866
-
Manufacturer Part NumberBB103
-
CountryUSA|Canada
-
Thickness17/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter5.73 in
-
Section SizeBB
-
Series9053
-
Number of Ribs1
-
Outside Length106 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
-
Alternative Part Number90530103
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Hi-Power® II BB103 Banded Heavy Duty Double V-Belt, BB Section, 21/32 in W Top, 106 in L Outside, 17/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
The United Abrasives/SAIT A46N Aluminum 1/4" Grinding Wheel is of the highest quality grain to assure consistent high stock removal. The A46N is composed of a special aluminum oxide formulation to prevent "loading" on soft metals. It outlasts competition by as much as 40%. Proudly manufactured in the USA.
Browning® 1059369 Type H2 Multiple Sheave, 3/8 to 1-1/2 in Split Taper Bore, 3.35 in OD, 2 Grooves, 3.3 in Dia Pitch, 1-3/32 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Gates® Power Transmission Hi-Power® II BB155 Banded Heavy Duty Double V-Belt, BB Section, 21/32 in W Top, 158 in L Outside, 17/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
.709" X 1.102" X .315" OIL SEAL - CHI7002>
Gates® Power Transmission MegaCrimp™ 8G-12MP G25 Straight Hydraulic Coupling, 1/2 in x 3/4-14 Nominal, Hose x Male NPTF, Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
