Gates® Power Transmission Hi-Power® II PowerBand® 4/D195 Banded Heavy Duty V-Belt, D Section, 1-1/4 in W Top, 200 in L Outside, 3/4 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
-
BrandGates® Power Transmission
-
UPC72053276527
-
Manufacturer Part Number4/D195
-
CountryUSA|Canada
-
Thickness3/4 in
-
MaterialEPDM
-
Top Width1-1/4 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter12.732 in
-
Section SizeD
-
Series9095
-
Number of Ribs4
-
Outside Length200 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
-
Alternative Part Number90954195
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Gates® Power Transmission Hi-Power® II PowerBand® 4/D195 Banded Heavy Duty V-Belt, D Section, 1-1/4 in W Top, 200 in L Outside, 3/4 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Browning® Classical Gripbelt® 1042100 AK Series Type 1 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 3-3/4 in OD, 3.7 in (A)/3.16 in (3L) Dia Pitch, 3/4 in W Face
3/8" X 48 BLACK HEAT SHRINK TUBE-DEL98029505 >
1-GAL DEEP ACCENT BASE PAINT-BLP142030GAL >
Browning® Classical Gripbelt® 1042209 AK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 6-1/4 in OD, 6.2 in (A)/5.66 in (3L) Dia Pitch, 3/4 in W Face
CRC® 2130 Flammable Contact Cleaner, 11 oz Aerosol Can, Liquid Form
CRC QD Contact Cleaner is suitable for cleaning sensitive electronics. As a contact cleaner it evaporates quickly, leaves no residue and is safe to use on all plastics. Use where lower flashpoint cleaners are acceptable. NSF K2 Registered.

