Gates® Power Transmission Tri-Power® CX162 Heavy Duty Molded Notch V-Belt, CX Section, 7/8 in W Top, 166 in L Outside, 17/32 in THK, EPDM
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
-
BrandGates® Power Transmission
-
UPC72053015638
-
Manufacturer Part NumberCX162
-
CountryUSA|Canada
-
Temperature Range-70 to 250 deg F
-
Thickness17/32 in
-
MaterialEPDM
-
Top Width7/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Minimum Pulley Diameter7.958 in
-
Section SizeCX
-
Series9014
-
Number of Ribs1
-
Outside Length166 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- Belt edge is machined for even sheave groove contact resulting in smoother running, less slip and wear
- Patented ethylene material construction provides -70 to 250 deg F temperature range to resist belt cracking
-
Alternative Part Number90142162
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Tri-Power® CX162 Heavy Duty Molded Notch V-Belt, CX Section, 7/8 in W Top, 166 in L Outside, 17/32 in THK, EPDM
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
1.000" X 1.375" X .250" DUAL LIP SHAFT SEAL WITH SPRING, NITRILE RUBBER LIP MATERIAL, SKF WAVE SEAL
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
18-MIL LARGE LINED YELLOW LATEX GLOVE-GREWA8908A >
ECO-FRIENDLY, CLEAN, CLEAR, ODORLESS ICE MELT THAT IS BIODEGRADABLE, NON-HAZARDOUS, AND NON-STAINING. 70% LESS CORROSIVE THAN ROCK SALT. IDEAL FOR USE BY SNOW REMOVAL PROFESSIONALS BECAUSE IT IS SAFE ON ALL SURFACES AND IS THE FASTEST ACTING ICE MELT PRODUCT AVAILABLE. MORE COST EFFECTIVE THAN GRANULAR PRODUCTS. ELIMINATES THE NEED FOR SALTING. FEATURES A UNIQUE 10 TO 14 DAY ANTI-BONDING RESIDUAL REACTIVATION EFFECT. SAFE ON ALL SURFACES, AND SAFE FOR DELICATE TREES AND SHRUBS.
- JWH701036>
United Abrasives-SAIT 28002 General Purpose Bench Grinding Wheel, 6 in Dia x 3/4 in THK, 1 in Center Hole, 80 Grit, Aluminum Oxide Abrasive
