Gates® Power Transmission Hi-Power® II C61 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 65 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
-
BrandGates® Power Transmission
-
UPC72053292671
-
Manufacturer Part NumberC61
-
CountryUSA|Canada
-
Thickness17/32 in
-
MaterialEPDM
-
Top Width7/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter7.958 in
-
Section SizeC
-
Series9004
-
Number of Ribs1
-
Outside Length65 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
- Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging
-
Alternative Part Number90042061
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Hi-Power® II C61 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 65 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Fist Grip® wire rope clips from Crosby® differ from traditional wire rope clips, with bolts and heavy hex nuts comprising the design. This allows for the nuts to be installed in a way that lets the operator swing the wrench in a full arc for quick install. Saddles are forged steel, with the entire clip galvanized for corrosion resistance.
Provides an efficiency rating of 80% for sizes 3/16" - 7/8", and 90% for sizes 1" - 1-1/2". All sizes meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. All sizes also meet additional critical performance requirements including fatigue life, impact properties and material traceability, not address by ASME B30.26.
FC-S2-300L Dodge® 070712 215 Non-Expansion Type S-2000 Flange Mount Roller Bearing Unit, 3 in Dia Bore, 5.3 in L Bolt Center-to-Center, 7-1/2 in Dia Bolt Circle, Piloted Flange Mount, 8-3/4 in OAL/Dia
Unit-housed double-row Dodge® S-2000 spherical roller bearings have higher ratings and long L10 life. A variety of housing styles and sealing options allow for easy application on material and air handling machinery. Industry standard dimensions make the products interchangeable with many brands.
United Abrasives-SAIT 1AX Blue Line™ 57106 Semi-Friable Coated Abrasive Belt, 3 in W x 18 in L, 100 Grit, Fine Grade, Aluminum Oxide Abrasive, Cotton Backing
United Abrasives-SAIT 1AX Blue Line™ 57105 Semi-Friable Coated Abrasive Belt, 3 in W x 18 in L, 80 Grit, Fine Grade, Aluminum Oxide Abrasive, Cotton Backing
Fist Grip® wire rope clips from Crosby® differ from traditional wire rope clips, with bolts and heavy hex nuts comprising the design. This allows for the nuts to be installed in a way that lets the operator swing the wrench in a full arc for quick install. Saddles are forged steel, with the entire clip galvanized for corrosion resistance.
Provides an efficiency rating of 80% for sizes 3/16" - 7/8", and 90% for sizes 1" - 1-1/2". All sizes meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. All sizes also meet additional critical performance requirements including fatigue life, impact properties and material traceability, not address by ASME B30.26.
