Gates® Power Transmission Hi-Power® II PowerBand® 5/C210 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 214 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
-
BrandGates® Power Transmission
-
UPC72053286137
-
Manufacturer Part Number5/C210
-
CountryUSA|Canada
-
Thickness17/32 in
-
MaterialEPDM
-
Top Width7/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter7.958 in
-
Section SizeC
-
Series9094
-
Number of Ribs5
-
Outside Length214 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
-
Alternative Part Number90945210
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Gates® Power Transmission Hi-Power® II PowerBand® 5/C210 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 214 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
TCM13265SL>
United Abrasives-SAIT 52895 Close Coated General Purpose Premium Abrasive Disc With Grinding Aid, 4-1/2 in Dia, 7/8 in Center Hole, 120 Grit, 3A Aluminum Oxide Abrasive
Sharkbite® U855W100 Tubing, 3/8 in Nominal, 0.35 in ID x 1/2 in OD x 100 ft Coil L x 0.07 in THK Wall, White, PEX, Domestic
SharkBite large-diameter Push-to-Connect fittings are the fastest way to connect PEX, copper, CPVC, PE-RT, or HDPE pipe in any combination. They are available in 1-1/4-IN, 1-1/2-IN and 2-IN CTS sizes. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.
INSSXR-100 Dodge® 131908 205 Normal Duty Ball Insert Bearing, 1 in Dia Bore, 1.5748 in OD, 1.62 in W, 3146 lb Dynamic/1769 lb Static Load
Dodge® 131908 205 Normal Duty Ball Insert Bearing, 1 in Dia Bore, 1.5748 in OD, 1.62 in W, 3146 lb Dynamic/1769 lb Static Load
Dodge® 083316 First Stage Pinion Gear, 9 Diametral Pitch, 9 Teeth, 0.9 in Dia Pitch
Dodge® 083316 First Stage Pinion Gear, 9 Diametral Pitch, 9 Teeth, 0.9 in Dia Pitch
