Gates® Power Transmission Tri-Power® BX90 Cogged Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 93 in L Outside, 13/32 in THK, EPDM
Constructed with Gates® proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as less stretch resulting in less maintenance.
-
BrandGates® Power Transmission
-
UPC072053266719
-
Manufacturer Part NumberBX90
-
CountryUSA
-
Temperature Range-70 to 250 deg F
-
Thickness13/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeCogged Heavy Duty Molded Notch
-
Minimum Pulley Diameter4.775 in
-
Section SizeBX
-
Series9013
-
Number of Ribs1
-
Outside Length93 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- Belt edge is machined for even sheave groove contact resulting in smoother running, less slip and wear
- Patented ethylene material construction provides -70 to 250 deg F temperature range to resist belt cracking
| Competitor Name | Competitor Part Number |
|---|---|
| Motion Industries | 00719923 |
-
Alternative Part Number90132090
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Tri-Power® BX90 Cogged Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 93 in L Outside, 13/32 in THK, EPDM
Constructed with Gates® proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as less stretch resulting in less maintenance.
Gates® Power Transmission Tri-Power® BX47 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 50 in L Outside, 13/32 in THK, EPDM
Constructed with Gates® proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as less stretch resulting in less maintenance.
Gates® Power Transmission Hi-Power® II B134 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 137 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Gates® Power Transmission Hi-Power® II B195 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 198 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Morse® Advanced Edge Power® 392143 Heavy Duty Reciprocating Saw Blade, 12 in L x 1 in W, 14, Bi-Metal Body
Morse RBWP124214T05 (392143), 12 x 14TPI, bimetal reciprocating saw blade is designed for cutting metal, from 1/8", up to 3/8", thickness. Wider, thicker blade body reduces blade deflection, increases rigidity, under heavier feed pressure. Five (5) blades per pack.
Gates® Power Transmission Tri-Power® BX124 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 127 in L Outside, 13/32 in THK, EPDM
Constructed with Gates® proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as less stretch resulting in less maintenance.
