Gates® Power Transmission Tri-Power® BX124 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 127 in L Outside, 13/32 in THK, EPDM
Constructed with Gates® proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as less stretch resulting in less maintenance.
-
BrandGates® Power Transmission
-
UPC072053267013
-
Manufacturer Part NumberBX124
-
CountryUSA
-
Temperature Range-70 to 250 deg F
-
Thickness13/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Minimum Pulley Diameter4.775 in
-
Section SizeBX
-
Series9013
-
Number of Ribs1
-
Outside Length127 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- Belt edge is machined for even sheave groove contact resulting in smoother running, less slip and wear
- Patented ethylene material construction provides -70 to 250 deg F temperature range to resist belt cracking
-
Alternative Part Number90132124
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Tri-Power® BX124 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 127 in L Outside, 13/32 in THK, EPDM
Constructed with Gates® proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as less stretch resulting in less maintenance.
MORSE® 59606 5970 Premium Carbide Burr, Radius End, Taper Head, 5/16 in Dia Head, 7/8 in L of Cut, 2-5/8 in OAL, Double Cut
MORSE® 59606 5970 Premium Carbide Burr, Radius End, Taper Head, 5/16 in Dia Head, 7/8 in L of Cut, 2-5/8 in OAL, Double Cut
Gates® Power Transmission Hi-Power® II B215 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 216 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
SMALL COATED COVERALLS WITH HOOD + ELASTIC WRISTS & ANKLES-CHR8001HEWAS>
Gates® Power Transmission Hi-Power® II B225 Banded Classical Heavy Duty V-Belt, B Section, 21/32 in W Top, 226 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Gates® Power Transmission Hi-Power® II B135 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 138 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
