Gates® Power Transmission Tri-Power® PowerBand® 2/BX70 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 73.6 in L Outside, 13/32 in THK, EPDM
Built for superior performance on heavy duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back side idler drives.
-
BrandGates® Power Transmission
-
UPC770075376897
-
Manufacturer Part Number2/BX70
-
CountryUSA|Canada
-
Temperature Range-60 to 250 deg F
-
Thickness13/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Section SizeBX
-
Series9098
-
Number of Ribs2
-
Outside Length73.6 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- Belt edge is machined for even sheave groove contact resulting in smoother running, less slip and wear
- Patented ethylene material construction provides -60 to 250 deg F temperature range to resist belt cracking
-
Alternative Part Number90982070
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Tri-Power® PowerBand® 2/BX70 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 73.6 in L Outside, 13/32 in THK, EPDM
Built for superior performance on heavy duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back side idler drives.
MEDIUM TYVEK COVERALL WITH HOOD AND ELASTIC WRISTS & ANKLES - TVKTY127SWHMD>
2-1/2" SCH-80 CPVC MALE ADAPTER-NIB1836025 >
Porter-Cable® FN250B Pneumatic Finish Nailer, 3/4 to 2-1/2 in Fastener, 100 Magazine, 70 to 120 psi, 16 ga THK Max Material
Tough Coat® provides the ultimate in durability and protective finishes. This high solids formula ensures maximum coverage and performance. Tough Coat® acrylic Enamels features our exclusive EZ Touch® FANSPRAY® Nozzle. This patented valve sprays a horizontal or vertical pattern and requires 50% less finger pressure than any other paint valve. A high solids formula ensures maximum coverage and performance. Tough coat delivers the ultimate in protection, durability, high gloss and color retention.
6-GRV 5-V-BELT QUICK DISCONNECT F-BUSH SHEAVES-IDC6/5V1600F >
