Gates® Power Transmission Tri-Power® PowerBand® 2/BX58 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 61.6 in L Outside, 13/32 in THK, EPDM
Built for superior performance on heavy duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back side idler drives.
-
BrandGates® Power Transmission
-
UPC072053308532
-
Manufacturer Part Number2/BX58
-
CountryUSA|Canada
-
Temperature Range-60 to 250 deg F
-
Thickness13/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Section SizeBX
-
Series9098
-
Number of Ribs2
-
Outside Length61.6 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- Belt edge is machined for even sheave groove contact resulting in smoother running, less slip and wear
- Patented ethylene material construction provides -60 to 250 deg F temperature range to resist belt cracking
-
Alternative Part Number90982058
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Tri-Power® PowerBand® 2/BX58 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 61.6 in L Outside, 13/32 in THK, EPDM
Built for superior performance on heavy duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back side idler drives.
Gates® Power Transmission Tri-Power® CX115 Heavy Duty Molded Notch V-Belt, CX Section, 7/8 in W Top, 119 in L Outside, 17/32 in THK, EPDM
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
LPS® 04920 x Fast Dry Solvent Degreaser, 20 oz Aerosol Can, Liquid, Clear/White, Mild Orange
The moderate-evaporating, heavy-duty degreaser that removes contaminants in seconds
Gates® Power Transmission Tri-Power® PowerBand® 2/BX70 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 73.6 in L Outside, 13/32 in THK, EPDM
Built for superior performance on heavy duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back side idler drives.
Gates® Power Transmission Tri-Power® PowerBand® 2/BX83 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 86.6 in L Outside, 13/32 in THK, EPDM
Built for superior performance on heavy duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back side idler drives.
JET® JT9-101940 S90 Contractor Grade Hand Chain Hoist, 3 ton Load, 10 ft H Lifting, 87 lbf Rated
JET® S90 Series Hand Chain Hoists were designed with all steel construction and ensure reliability and durability to perform in light-duty industrial applications. Easily maintained and serviced, the JET® S90 is available in capacities from ½ ton to 10 ton and standard lifts of 10, 15, 20, and 30 feet (custom lifts available). The JET® S90 is the ideal contractor grade hoist.
