Gates® Power Transmission Hi-Power® II PowerBand® 6/B120 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 123 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
-
BrandGates® Power Transmission
-
UPC72053480023
-
Manufacturer Part Number6/B120
-
CountryUSA|Canada
-
Thickness13/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter5.73 in
-
Section SizeB
-
Series9093
-
Number of Ribs6
-
Outside Length123 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
-
Alternative Part Number90936120
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Hi-Power® II PowerBand® 6/B120 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 123 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
1.178" X 2.073" X .335" OIL SEAL - CHI11650>
1.125" X 1.852X.313" OIL SEAL-CHI11197 >
30X52X10 HMSA10V OIL SEAL-CHI11644 >
SCOTSEALS-4.767" X 6.308" X 1.035"-HYDROGENATED NITRILE RUBBER WHEEL END COMPONENT
Gates® Power Transmission Synchro-Power® AT10-1250-50 Metric AT Synchronous Belt, 50 mm W, 1250 mm OAL, 10 mm Pitch, 125 Teeth, Polyurethane
Gates Synchro-Power™ polyurethane belts are designed for long-lasting and energy-efficient performance on both power transmission and linear applications. They are available in both endless and open-end versions in various sizes, constructions and tooth designs, handling a wide range of loads, speeds and applications.
