Gates® Power Transmission Hi-Power® II PowerBand® 4/B62 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 65 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
-
BrandGates® Power Transmission
-
UPC72053275599
-
Manufacturer Part Number4/B62
-
CountryUSA|Canada
-
Thickness13/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter5.73 in
-
Section SizeB
-
Series9093
-
Number of Ribs4
-
Outside Length65 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
| Competitor Name | Competitor Part Number |
|---|---|
| Motion Industries | 00685215 |
-
Alternative Part Number90934062
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Hi-Power® II PowerBand® 4/B62 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 65 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
TRAKROL® bearings feature black oxide treated bearing steel. They utilize either a precision ball or tapered roller bearing insert for longer operating life under combination radial and thrust loads. The capacity for combination loads allows the TRAKROL® bearing to be available in plain (cylindrical), V-groove and flanged outside diameter in both stud and yoke styles. Small sizes less than 3 in outside diameter or point diameter use sealed ball bearing inserts. They also use a NYLAPLATE® seal for additional protection. Stud type configurations utilize a metal end plug seal on the roller face providing a long lasting seal. Both bearing types provide a large internal grease reservoir along with special sealing. This makes TRAKROL® bearings an excellent choice where reduced maintenance is required.
Gates® Power Transmission MegaCrimp™ 16G-16MJ G25 Straight Hydraulic Coupling, 1 in x 1-5/16-12 Nominal, Hose x Male JIC 37 deg Flare End Style, Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
20" RED BUFFING PAD-JWH612154>
Bolt Center [Min] 6.938 in
Inner Race Length (in) 4
Inch/Metric Inch
Inner Race Heat Treat Method Case Carburized Inner Ring
Platform RPB Series
Housing Base Solid
Base Width (in) 2.75
Rolling Element Tapered
Bolt Center Min (in) 6.938
Expansion No
RIDGID® 32920 Screw Feed Tubing Cutter, 3/16 to 1-1/8 in Nominal, Ergonomic Grip Handle
RIDGID® 32920 Screw Feed Tubing Cutter, 3/16 to 1-1/8 in Nominal, Ergonomic Grip Handle
