Gates® Power Transmission Hi-Power® II PowerBand® 2/B83 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 86 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
-
BrandGates® Power Transmission
-
UPC72053243598
-
Manufacturer Part Number2/B83
-
CountryUSA|Canada
-
Thickness13/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter5.73 in
-
Section SizeB
-
Series9093
-
Number of Ribs2
-
Outside Length86 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
-
Alternative Part Number90932083
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Hi-Power® II PowerBand® 2/B83 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 86 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Smith Bearing® CR-1/2-B CR-B Cylindrical Stud Type Needle Bearing Cam Follower, 1/2 in Dia x 3/8 in W Roller, 0.19 in Dia x 5/8 in L Stud, 52100 Steel Roller
Hex head stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel.
MCR Safety 990XXL General Purpose Gloves, 2XL, Split Leather Palm, Grey, Knit Wrist Cuff
Memphis multitask series feature an assortment of fabrics, designs, and colors at some of our most competitive prices. Comfort, durability, launderable, breathable, and lightweight materials best describe common features for Memphis multitask hand protection. The Memphis Multi-Task 990 is one of the most flexible and comfortable multi-tasks in the market. The 990 features soft Mossy Oak Break Up Infinity® pattern multi-layer stretch fabric on the back and thumb, gray synthetic leather palm with "shattered Max" design. The wing thumb and reinforced thumb crotch add to the comfort and durability of the 990 style.
1.000"X1.437"X.250" SINGLE LIP SHAFT SEAL WITH SPRING, NITRILE RUBBER LIP MATERIAL, SKF WAVE SEALS
Dodge® 123818 210 Normal Duty Pillow Block Ball Bearing Unit, 1-15/16 in Dia Bore, 6 to 6.68 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.12 in OAL x 4.53 in OAH
Dodge® 123818 210 Normal Duty Pillow Block Ball Bearing Unit, 1-15/16 in Dia Bore, 6 to 6.68 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.12 in OAL x 4.53 in OAH
Gates® Power Transmission Hi-Power® II PowerBand® 2/B87 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 90 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
