Bando Power King® B94 Multi V-Belt, 0.66 in W Top, 97 in L Outside, 0.41 in THK, B Section, Rubber
Bando Power King® B94 Multi V-Belt, 0.66 in W Top, 97 in L Outside, 0.41 in THK, B Section, Rubber
-
BrandBando
-
UPC649717291921
-
Manufacturer Part NumberB94
-
CountryUSA
-
Temperature Range-1 to 158 deg F
-
Thickness0.41 in
-
MaterialRubber
-
Top Width0.66 in
-
TypeMulti
-
Minimum Pulley Diameter4.41 in
-
Section SizeB
-
Number of Ribs1
-
Outside Length97 in
- BANDO's continuous improvements in materials, design and manufacturing methods make the Power King® classical cross section belt the workhorse of industry
- Ultra high strength polyester cords assure fatigue resistance and length stability while providing the flexibility needed to attain long, trouble free service
- Specially compounded rubber body reduces heat build-up while giving firm support to the cords, maintaining uniform load distribution
- Bias cut, rubber impregnated fabric cover provides superior flexibility and friction resistance, oil and heat-resistant
- Meets RMA standards for oil and heat resistance and static conductivity
-
UNSPSC26111801
-
Standards/ApprovalsRMA Standard
Recently Viewed
Bando Power King® B94 Multi V-Belt, 0.66 in W Top, 97 in L Outside, 0.41 in THK, B Section, Rubber
Bando Power King® B94 Multi V-Belt, 0.66 in W Top, 97 in L Outside, 0.41 in THK, B Section, Rubber
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Gates® Power Transmission Hi-Power® II C120 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 124 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
1.250" X 1.625" X .188" OIL SEALS-CHI11096 >
Gates® Power Transmission Hi-Power® II C100 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 104 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
