Gates® Power Transmission Hi-Power® II A95 Banded Heavy Duty V-Belt, A Section, 1/2 in W Top, 97 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
-
BrandGates® Power Transmission
-
UPC072053202809
-
Manufacturer Part NumberA95
-
CountryUSA|Canada
-
Thickness5/16 in
-
MaterialEPDM
-
Top Width1/2 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter4.138 in
-
Section SizeA
-
Series9002
-
Number of Ribs1
-
Outside Length97 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
- Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging
| Competitor Name | Cross-Reference Number |
|---|---|
| Motion Industries | 00726915 |
-
Alternative Part Number90022095
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Hi-Power® II A95 Banded Heavy Duty V-Belt, A Section, 1/2 in W Top, 97 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Bostitch® F28WW Angled Offset Round Framing Nailer, 2 to 3-1/2 in Fastener, Wire Collation, 100 Nails Magazine, 120 ps
Bostitch® F28WW Angled Offset Round Framing Nailer, 2 to 3-1/2 in Fastener, Wire Collation, 100 Nails Magazine, 120 ps
Browning® 1009992 Arm Type 13 Multiple Sheave, 3/4 to 2-11/16 in Split Taper Bore, 11.4 in OD, 3 Grooves, 11.4 in Dia Pitch, 3-1/4 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Littelfuse® MAX50 MAXI™ 299 Slow Blow Time Delay Automotive Fuse, 50 A, 32 V DC, 1 kA Interrupt
MAXI™ fuses are primarily used for under hood applications and are produced with a high temperature polymer and silver plated blades. They replace the commonly used fusible wire or fusible link to protect a high current segment or system of the wiring harness. Features Littelfuse designed industry standard color coding to indicate amp rating.
Black Stallion® JF1010-OR-LRG Jacket, L, Cotton, Orange, Resists: Flame, ASTM F1506
The Black Stallion JF1010-OR is our 9 Oz Flame Resistant Safety Welding Jacket with FR Triple Trim Reflective Tape. 30 inches in length, the safety orange welding jacket is loaded with safety extras. 2” flame-resistant triple trim tape with 3/4” reflective silver helps keep the wearer visible, even in low light or visibility. The standup welder's collar helps protect the neck from sparks and splatter while welding, while the left sleeve scribe pocket holds welding markers & pens. A convenient inside pocket holds small items and devices and 6 powder-coated steel front snaps and wrist snaps help keep the fit snug and adjustable. Overall, the JF1010 is ideal for light welding applications where being "seen" is critical (construction, traffic zones, etc.).
Browning® Gearbelt® 1057132 Type 16 Synchronous Timing Pulley With Flange, 3/8 to 1-1/2 in Split Taper Bore, 4.084 in OD, 26 Grooves, 4.138 in Dia Pitch, 1-3/4 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
