Gates® Power Transmission Hi-Power® II A88 Banded Heavy Duty V-Belt, A Section, 1/2 in W Top, 90 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
-
BrandGates® Power Transmission
-
UPC72053202663
-
Manufacturer Part NumberA88
-
CountryUSA|Canada
-
Thickness5/16 in
-
MaterialEPDM
-
Top Width1/2 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter4.138 in
-
Section SizeA
-
Series9002
-
Number of Ribs1
-
Outside Length90 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
- Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging
| Competitor Name | Competitor Part Number |
|---|---|
| Motion Industries | 00678003 |
-
Alternative Part Number90022088
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Hi-Power® II A88 Banded Heavy Duty V-Belt, A Section, 1/2 in W Top, 90 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Black Stallion® F9-21CS-L F9-21CS FR Cotton Cape Sleeve, L, Green, Cotton, Snap Front/Wrist Closure
The Black Stallion F9-21CS FR Cotton Cape Sleeves provides protection against sparks and splatter. The F9-21CS is made with 9 oz. flame-resistant treated cotton, and features snaps on the front and wrists and a scribe pocket.
MCR Safety CK118 Checkmate® Value Safety Glasses, Duramass® Hard Coat, Rainbow Mirror Lens, Frameless Frame, Black, Polycarbonate Frame, ANSI Z87+
MCR Safety CK118 Checkmate® Value Safety Glasses, Duramass® Hard Coat, Rainbow Mirror Lens, Frameless Frame, Black, Polycarbonate Frame, ANSI Z87+
Greenlee® 825-4-1/2 Variable Pitch Hole Saw, 4-1/2 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor
Greenlee® 825-4-1/2 Variable Pitch Hole Saw, 4-1/2 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor
Fist Grip® wire rope clips from Crosby® differ from traditional wire rope clips, with bolts and heavy hex nuts comprising the design. This allows for the nuts to be installed in a way that lets the operator swing the wrench in a full arc for quick install. Saddles are forged steel, with the entire clip galvanized for corrosion resistance.
Provides an efficiency rating of 80% for sizes 3/16" - 7/8", and 90% for sizes 1" - 1-1/2". All sizes meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. All sizes also meet additional critical performance requirements including fatigue life, impact properties and material traceability, not address by ASME B30.26.
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
