Gates® Power Transmission Hi-Power® II A98 Banded Heavy Duty V-Belt, A Section, 1/2 in W Top, 100 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
-
BrandGates® Power Transmission
-
UPC72053202847
-
Manufacturer Part NumberA98
-
CountryUSA|Canada
-
Thickness5/16 in
-
MaterialEPDM
-
Top Width1/2 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter4.138 in
-
Section SizeA
-
Series9002
-
Number of Ribs1
-
Outside Length100 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
- Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging
| Competitor Name | Competitor Part Number |
|---|---|
| Motion Industries | 00678072 |
-
Alternative Part Number90022098
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Gates® Power Transmission Hi-Power® II A98 Banded Heavy Duty V-Belt, A Section, 1/2 in W Top, 100 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
MCR Safety 86110 Prodigy® DLX Dual Lens Lightweight Safety Glasses, Duramass® Hard Coat, Clear Lens, Navy Blue, Nylon Frame, Polycarbonate Lens, ANSI Z87.1-2003, CSA Z94.3
MCR Safety 86110 Prodigy® DLX Dual Lens Lightweight Safety Glasses, Duramass® Hard Coat, Clear Lens, Navy Blue, Nylon Frame, Polycarbonate Lens, ANSI Z87.1-2003, CSA Z94.3
BBI 489071 Fully Threaded Carriage Bolt, 3/8-16, 1-1/4 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
BBI 489071 Fully Threaded Carriage Bolt, 3/8-16, 1-1/4 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
Gates® Power Transmission Hi-Power® II A73 Banded Heavy Duty V-Belt, A Section, 1/2 in W Top, 75 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
BBI 489096 Undersized Carriage Bolt, 3/8-16, 12 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
BBI 489096 Undersized Carriage Bolt, 3/8-16, 12 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
Gates® Power Transmission Hi-Power® II A77 Banded Heavy Duty V-Belt, A Section, 1/2 in W Top, 79 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
