Gates® Power Transmission PowerGrip® 180XL037 Extra Light Timing Belt, 3/8 in W, 18 in OAL, 0.2 in Pitch, 90 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053563252
-
Manufacturer Part Number180XL037
-
CountryUSA|Canada
-
Pitch0.2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeExtra Light
-
Minimum Pulley Diameter0.62 in
-
Width3/8 in
-
Series9257
-
Number of Teeth90
-
Overall Length18 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92571312
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® 180XL037 Extra Light Timing Belt, 3/8 in W, 18 in OAL, 0.2 in Pitch, 90 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
80-MM-OD STUD TYPE CAM FOLLOWERS-INANUKR80A>
In a matter of seconds, your feet can be protected without changing your shoes. Our shoe caps slip easily over your own street shoe and strap firmly around the back of your heel. These are especially beneficial to the temporary employee or visitors to your plant. While there is not an OSHA standard for over the shoe foot protection, it is required that they meet ANSI standard Z-41-1991 for 30 pounds of impact resistance. We randomly test our shoe caps to assure that we meet or exceed these impact standards.
RCJT-1-15/16 1-15/16"-ID 2-bolt Flange
1-15/16"-ID 2-BOLT FLANGE UNITS-INARCJT115/16>
1-1/2" PLASTIC/POLY INSERT TEE - JWH424794>
Charlotte PVC 01112 0600, 3 x 1-1/2 in nominal, Hub x Spigot end style, SCH 30, PVC, Domestic
PVC Schedule 30 Thin-Wall Pipe and Fittings are for drain, waste and vent purposes only. It is used in gravity fed waste elimination systems. It is for Non-Pressure systems where temperatures will not exceed
